Other

The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.

The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.

Need a non-quick-release seatpost collar with some major bling? Then Salsa's Lip-Locks are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.

The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system. - Thread Length: 9mm - Thread Pitch: 15 x 1.5mm

Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters

One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.

The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.

Mylar-laced woven elastic guard stretches around your fork to block mud/water as you ride.

Campagnolo Extra Parts

Fit Kit SET702 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle. This kit includes: - 15 x 145 mm thru axle with M14 x 1.5 mm thread pitch to fit Fox 15 x 100 mm forks (may fit others as well) - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Replacement faceplates for Ritchey WCS C220 stems.

Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Replacement T20 bolts for Super Logic stems - Includes T20-M4x15L x 4pcs & T20-M4x18L x 3pcs - Bit Size: Torx 20 - Thread Pitch: M4 - Length: 18mm (x3), 15mm (x4)

This magnetic stem cap is designed exclusively for the unique shape of the revolutionary Ritchey Chicane stem. - Material: alloy - Fits only Chicane stem - Weight: 6g

One air can to span them all. The new DebonAir+ Linear XL air can is Super Deluxe’s secret weapon. Riders asked for a shock that bridged the gap between Super Deluxe and Vivid. The Linear XL air can is the answer. With an increase in positive air volume, Linear XL is a dead ringer for a coil with super supple action at the top of the travel. This improved air can doesn’t sacrifice tunability, either. With room for a total of eight Bottomless Tokens (four in the eyelet and four on the air sleeve), the air volume can be adjusted to fine-tune feel.

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

36 Air Shaft Assembly for Fox suspension forks.

External Reverb and Reverb Stealth parts that can be installed without needing to open the mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Chainstay protectors to guard your Salsa frame from scratches and damage.

Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp. - NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place - NOTE: NOT FOR USE with carbon fiber seatposts - NOTE: Please consult your seatpost manufacturer to check compatibility - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Available for 27.2, 30.9, and 31.6 mm diameter seatposts

Salsa Alternator 1.0 and 2.0 UDH Kit for post-mount brakes. - This Alternator Plate set works with all Alternator 1.0 and Alternator 2.0 compatible Salsa frames to allow the use of SRAM Full Mount derailleurs or SRAM UDH. - Fixes wheel in rearmost Alternator plate position (17mm back) - Native 160mm post-mount disc brake compatibility (no IS adaptor required) - Includes required upper non-drive side bolt (choose 16mm or 18mm length to match frame thickness) and lock nut. All other hardware is re-used from current plates or can be purchased in the Alternator 1.0 or Alternator 2.0 Hardware Kit. - Requires a 12mm thru axle with 1.0TP and either a SRAM UDH or SRAM Full Mount derailleur (not included). Consult the Plate Kit instructions for recommended axle length based on the frame hub standard. - Engineering Identifier Number: 06-004162

Front Derailleur Mount for specific Salsa frame models. - Derailleur Mount Required for Direct Mount Front Derailleurs - Salsa Road Boost Front Derailleur Mount for 148 mm rear hub spacing - Enables installation of a braze-on front derailleur - Offset for 148 mm rear hub spacing - Replacement part for Cutthroat v2 frames - Wrap-around design provides additional derailleur stability - Interfaces with derailleur support bolt

Alternator 1.0 Set Screws

Replacement swing plates for Alternator 1.0 dropouts.

Thru-axles engineered for a better ride! Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models. Designed, machined and tested in Colorado, USA. 5mm hexon both endsof the axle for easy installation and removal. Hard anodized finish for extra durability. Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage. Axle length is compatible +/- 2mm Replacement for OEM thru-axles Tech Specs: Material: 7075 aluminum Hard anodized Diameter: 12mm Torque Spec: 12 Nm max Tool Interface: 5mm hex key Made in the USA

Transform Your Ride with Unmatched Simplicity and Performance. Are you ready to simplify your cycling setup and enhance your riding experience? Look no further than the all-new SOLO-SPLINE Single Speed Conversion Kit from Wheels Manufacturing. Designed specifically for Shimano Micro Spline compatible hubs, this innovative kit is your gateway to a streamlined, high-performance single-speed system. Following the success of our Solo-XD kit, the SOLO-SPLINE continues our tradition of excellence and innovation. It offers an easy and affordable way to convert your existing Shimano wheels into a robust single-speed setup. Ideal for commuters, racers, and trail enthusiasts, the SOLO-SPLINE delivers the reliability and straightforward performance that single-speed riders love. Why Choose the SOLO-SPLINE? The SOLO-SPLINE features a unique design that incorporates a base sleeve and lockring which smoothly fits onto the Shimano Micro Spline compatible freehub body. This mirrors the hassle-free installation of a standard cassette, allowing for quick setup changes. Slide on the spacers and cog, and secure them with a dependable lock ring. Experience the perfect ride, tailored to your preferences and riding style. Key Features of the SOLO-SPLINE: Precision Engineering: Utilizes a durable 7075 Aluminum carrier and cogs, with lightweight 6061 Aluminum spacers. Adjustable Setup: Includes adjustable spacers to fine-tune your chainline for optimal performance. Compatibility: Designed specifically for Shimano Micro Spline compatible hub bodies. Enhanced Chain Retention: Features a cog designed with a narrow-wide tooth pattern to ensure superior chain hold. Customizable Options: Available cog sizes include 16T, 18T, and 20T, allowing you to customize your ride. Lightweight Design: At only 101g, the kit is lighter than many other options on the market, reducing rotational mass for faster acceleration and easier climbing. Included in the Kit: 1 Lock Ring (6061 Aluminum) 1 Carrier Ring (7075 Aluminum) 1 End Spacer (6061 Aluminum) 1 5mm Spacer (6061 Aluminum) 2 2mm Spacers (6061 Aluminum) 1 1mm Spacer (6061 Aluminum) 1 18T Cog (7075 Aluminum)

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application - These hangers do not come with mounting hardware - CNC machined 6061 aluminum - Black anodized finish - Made in the USA