Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$70.99
Zipp's QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes: system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. This is an easy way to add elegant integration to your road bike.
- Computer compatibility: Garmin, Wahoo
- Accessory compatibility: GoPro
- Lights: Niterider Lumina Series (with adapter), Light and Motion, Bontrager (with adapter), Gloworm (with adapter), Lezyne (with adapter), Infini (with adapter), Sigma Sport
- Lifetime warranty
$15.99
With aerobars, short stems and hydration systems crowding the front end of your bike, it's hard to mount a computer. But, with Xlab's Aero Computer Mount Gen 2 you can mount your computer to your stem cap! It's aero because it fits neatly behind aero drink systems and horizontally mounted bottles, and the extra height of the mount makes your computer easier to read. It can also be mounted on the Xlab Torpedo Mini Mount, placing your computer in front in your line of sight.
• The Aero Computer Mount, re-designed! Aerodynamically designed and longer to support larger screen computers
• Mount in front of Torpedo Systems or on stem bolt
• Helps reduce drag from a computer mount with one that was designed with aerodynamics in mind
• Mount in front of TORPEDO SYSTEM (sold separately) for optimum viewing.
• Mount on stem when using non-XLAB drink systems (sold separately)
• Easy to read when in aero position
• Fits most computers including the new longer form factor models (sold separately)
• Mount is 37 mm wide. Plenty of room to support the popular Garmin computers (sold separately)
• Includes hardware and instructions
• Weight: 29.5 grams
$10.99
By popular demand! Modify your Torpedo Versa, Torpedo Kompact 125 or 500 to mount more than just Garmin computers and watches! Switch out the mount insert for a Polar, Wahoo, or Universal strap-mounted bike computers such as Cateye or Sigma.
- Easily convert the highly-acclaimed, telescoping Torpedo Versa Computer Mount to work with a variety of popular bike computers
- Also converts the computer mount on the award-winning Torpedo Kompact 125 and 500 models
- With just the turn of a couple of screws, you'll be off and riding with your favorite bike computer
Kit includes (3) inserts, each clearly labeled:
- Wahoo
- Polar
- Strap-mount for computers such as Cateye or Sigma
Weight:
- Garmin/Wahoo Insert: 5g
- Polar Insert: 5g
- Universal Strap-Mount Insert: 12g
3 Year Limited Warranty
$98.99
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days.
- Telescoping Garmin mount features on-the-go tilt adjust to avoid glare.
- Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out.
- Capacity: 26oz (768 mL)
- Material: Plate: 6061-T6 Aluminum
- Cage: Nylon Composite Vee Cage
- Computer Mount: Nylon Composite
- Bottle: Lead free, BPA-Free and HDPE food safe certified bottle
- Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm
- Weight: 9.3oz (265g)
$14.99
Our aerobar/TT mount for Wahoo ELEMNT GPS bike computers is made of lightweight, durable plastic and is the ideal viewing position during your triathlon or time trial.
- Fits 22.2mm aero bar extensions
- Weight: 0.3oz
- Works with ELEMNT, ELEMNT BOLT, and ELEMNT MINI
(Note: BOLT loses aerodynamic advantage with this mount)
$24.99
Our integrated mount for the ELEMNT BOLT GPS bike computer is made of durable, lightweight plastic. It also comes with an optional locking screw that is UCI compliant for connecting your ELEMENT BOLT to your bike for weigh-ins.
- Fits Canyon Endurance 2017 and newer models and other integrated handlebars with two underside mounted bolts between 0.70 inches (17.75mm) and 2.00 inches (50.88mm)
- Weight: 0.6oz
- Works exclusively with original ELEMNT BOLT
$14.99
With this adaptor piece, you are able to easily convert any Garmin quarter turn bike computer mount to a Wahoo bike computer mount.
$19.99
Our integrated mount for the ELEMNT ROAM GPS bike computer is made of durable, lightweight plastic. It also comes with an optional locking screw that is UCI compliant for connecting your ELEMENT ROAM to your bike for weigh-ins.
- Compatible with integrated handlebars with two underside mounted M4 or M5 bolts between between 0.70 inches (17.75mm) and 2.00 inches (50.88mm). For M4 bolts use the included washers.
- Works exclusively with ELEMNT ROAM
- Screws not included
- M4 or M5 Mounting Bolts not included
$14.99
Our stem mount for Wahoo ELEMNT GPS bike computers is made of lightweight, durable plastic and is a great solution for cyclists who prefer to keep their computer on top of the stem.
- Fits any stem
- Weight: 0.2oz
- Works with ELEMNT, ELEMNT ROAM, ELEMNT BOLT, and ELEMNT Mini
Note: BOLT loses aerodynamic advantage with this mount)
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- It only weighs 7 grams!
- Provides accurate cadence data during your ride
- (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties.
- The RPM can be worn on your shoe for spin classes or use with multiple bikes
- Two LED lights show the sensor's device connection (blue) and cadence detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM cadence sensor will fit with most bikes and frame sizes
$14.99
Our forearm heart rate strap is compatible with the Wahoo TICKR FIT optical heart rate monitor. This adjustable band is gives you a reliable and secure fit to withstand your toughest workouts including running, cycling, fitness classes and more. Simply remove the pod and it is easily hand washable.
- Contains a small and large strap
- Hand wash only
- Not compatible with chest straps
$69.99
Allows you to mount a computer in front of the cockpit using the two threaded inserts on Fraser and Creston iC cockpits.
KEY FEATURES
- Fits Fraser or Creston iC cockpits
- Secure mounting using 2 screws
- Quality alloy construction
- Wahoo adapter available
$59.99
Whenever and wherever your adventure takes you, it's sure to be one you embark on with your smartphone. The Cruzen Universal Bike Mount is the most complete mounting solution for attaching a smartphone to your bike on the market. Whether you're bombing mountains on your downhill bike, CRUZEN the boardwalk on your beach cruiser or running with your jogger/stroller, the X-Grip handlebar mounting kit is guaranteed not to disappoint. But don't take my word for it.
- Bar Mount
- Stainless Steel Hardware
- Cruzen Logo Friction Pad
- 2 Spare Replacement Tips
- Circular Rubber Spacer
- Rubber Shim for thinner bars
- Tether: For use on rough terrain.
$99.99 - $129.99
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want.
- Limitless remote shifting positions for drop and aero bars
- Wired shift buttons can be positioned however the rider prefers
- Connect to Blip Box or drop bar eTap levers
- Compatible with SRAM RED eTap shift/brake controls
$49.99
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap
$414.99
Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero.
- Replaces standard drop bar shift levers
- Simple and intuitive eTap shift logic
- AXS enabled for easy personalization
- Limitless aero configurations
- Two ports per side for Blips
- Fits the included optional stem mount
- Compatible with existing eTap Blips and Clics
- Mounts inside stem faceplate cap, feed box or frame
$59.99
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap
$15.99
- Use to keep Blips in place on handlebars
- Fits 31.8mm round portion of drop bar
- Clamp mounts directly to bar outside of tape zone
- Ideal for use with thumbs or index fingers while hands are on the tops
- Right and left specific, just like Blips
- Weight: 12 grams (for pair)
- Material: Polypropylene
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap
$4.99
The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters.
- Tool-free installation
- Alloy construction
- Fits round and bladed spokes
$19.99
The Forward Mount is a hinged handlebar mount featuring a stiff and durable composite matrix construction with secure X-Lock and an integrated rubber shim. With a pressed-in stainless steel nut and 3mm hex stainless steel bolt, this mount's sleek, lightweight design positions the GPS computer in front of the stem for better visibility and improved aerodynamics. The X-Lock is a secure and reliable mounting feature integrated into the Standard GPS Mount and the Forward GPS Mount. It safely locks in the computer for worry-free riding over any type of terrain.
$67.99
The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter.
- Max combo mount is compatible with GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820)
- Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface
- GARMIN approved replaceable computer insert protects computer tabs
- CNC Machined Aluminum, Anodized Black with laser etched logos
- Made in-house, Boise, Idaho USA with a Lifetime Warranty
- Weight: 60g
$29.99
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20.
- Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system
- Fits 31.8MM Handlebars
- NOT combo compatible
- Weight: 48g
- Anodized Color- Black
$39.99 - $41.99
A lightweight and highly adjustable mount for positioning any Garmin computer on aero bars. The pivoting two piece design offers multiple mounting positions based on aero bars, hydration systems and rider preference.
- For 22.2mm diameter aero bar extensions
- Compatible with all Garmin EDGE computers
- Highly adjustable for multitude of mounting positions
- Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system
- GoPro Interface Compatible
- Weight: 29g
- Anodized Colors: Black, Red, Blue
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
$49.99
- CNC-machined professional grade aluminum camera mounts for Go Pro cameras
- Lock the camera case on to either your handlebars or seat rails depending on model
- Greatly reduces camera shudder and improves video images
- Powerful clamping via all metal bolt/mount system for 31.8mm diameter handlebars on handlebar mounts
- 1/4" mount provides a solid platform for any camera that has a standard 1/4" interface
- Lifetime warranty, made in the USA
$24.99
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820).
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface
- Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.)
- Made in Boise, Idaho, USA.
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
$54.99 - $59.99
Superlight, machined aluminum, race mount for the ultimate Tour de France level performance. At 32 Grams the Race Mount is 33% lighter than the “standard” Garmin Mount.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatibility: Garmin 820, 520, 510, 500, 25, 20
- Fits Handlebars: 31.8MM
- NOT GoPro Compatible
- Anodized Color: Black, Red, Blue, Red/Blue
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded.
* Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME.
The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties.
Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
$5.99
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break.
- Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503)
- Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
$5.99
Replacement plastic insert kit for K-EDGE Wahoo Mounts.
The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break.
Attributes (specs):
– Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604)
– Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
Page 1 of 4
Next page