Your Search: "argon 18"

- Urban/recreational tire with shallow, grooved tread for multiple conditions - 18 x 1.75

- Size: 18 x 1-3/8 - ISO Diameter: 400/18" - ISO Width (mm): 35mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 98g

- Low Lead Valve - ISO Diameter: 355 - ISO Width: 44mm , 45mm , 46mm , 47mm , 48mm , 49mm , 50mm , 51mm , 52mm , 53mm , 54mm - Labeled Size: 18 x 1.75-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 118g

- Size: 650c x 18 – 23 - ISO Diameter: 571 / 650c - ISO Width: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 89-92g

These are no ordinary bicycle tubes! These extra strong inner tubes stop flats for 2 years because there is Slime inside. - No more flats for 2 years! - Extra strong with Slime sealant inside - Instantly seals tread area punctures up to 1/8" (3mm) in size - Seals multiple punctures repeatedly - Non-toxic and non-flammable - Cleans up with water

Heavy duty 3/16" single speed chain great for hardcore street rippers who need the strongest chain possible. - Extra-wide, for non-derailleur bikes: BMX, cruisers and tricycles - Compatible with 1/8" x 1/2" single speed set-ups but oversized for extra strength and durabilityLinks (links): 98 - Width: 13.1 mm - Drivetrain Speeds: Single Speed 1/2" x 3/16" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 800g

The Finish Line Absorb-It Mat is the perfect way to keep any work area clean. Designed with special absorption fiber technology, the Absorb-It Mat absorbs and traps chain lubricants, cleaners, degreasers, brake fluid and hydraulic oils. The combination of absorption fibers and a leak-proof poly liner make the Absorb-It Mat perfect accessory when degreasing & lubricating bicycle chains. Use the Absorb-It on a work bench, under an automobile to catch leaking fluids, in a car trunk to prevent stains, in a chemical storage cabinets, or under a trainer to catch perspiration. The Absorb-It Mat comes in two different sizes: Small (48" X 18") and Large (60" X 36"). The 48" x 18" will absorb and trap up to 11L of fluids. The larger 60" x 36" will absorb and trap up to 2.5L of fluid. Both mats can be cut with a scissor to fit in custom areas.

The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

Mirrycle's Incredibell Spring Bell offers a traditional Asian-style bell that integrates into the top cap of the headset to free up valuable handlebar space. The bell can be mounted any way you choose on the headset, and the dinger is adjustable as well. A flick of your finger and the Spring Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1.8") - Weight: Black and Silver: 26g (.9oz), Brass: 57g (2oz)

Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included. - 50 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 30mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum

These are the adaptors included with HHP-2, also available separately. Sold as a pair. The adaptors are stepped at 25.7mm, 29.7, and 32.8mm. - For replacement or retrofit to older bearing press tools - Adapts older HHPs to fit headcups for 1" and 1- 1/8" - Multi-step adapters fit most press fit cup applications

The TL-6.3 is a set of tire levers designed to provide all the advantages of both steel and composite tire levers. The steel core with protruding tip offers the strength and leverage needed to securely engage stubborn tire beads, while the durable composite coating makes for smooth operation and will not mar sensitive rim surfaces. With its ergonomic shape and ideal size, the TL-6.3 is perfect for use as an everyday shop lever or can be stored in a saddlebag or tool roll for the mobile mechanic. - Redesigned to be stronger and 0.75" (18 mm) longer than their successor, TL-6.2. - Set of two - Dimensions (each): 145 mm x 25 mm x 6 mm (5.75" x 1" x 0.24") - Weight (each): 46 grams (1.6 ounces) - TL-6.3 levers have been redesigned to be stronger and 0.75" (18 mm) longer than their successor, for increased leverage

- Merino wool blend for warmth and durability - Thin construction like a summer sock for a close fit in the shoe but with Merino wool for warmth - 18 cm cuff

Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

The Odyssey 13T freewheel threads on to the metric (small) side of a flip flop hub. - Freewheel Teeth: 13 - Cassette Body Type: Threaded Metric 30 x 1mm - Chain Compatibility: 1/2" x 1/8" - Weight: 113g

This 18-gram water bottle cage is nearly as light as air. The cold forged, single body aluminum construction grabs hold of your water bottle until you need to wet your whistle. Its handsome and streamlined design will complement any bike. - Cold forged, single body aluminum construction - Tapered arms for easy water bottle access - Bolt-on mounting - Weight: 18 grams

- Park/street tire, with directionally grooved tacky tread - Wire bead - Size: 18 x 2.0

Also called a sleeping hub, the Dummy Hub slides into rear dropouts and replaces the rear wheel for chain cleaning and transport. The DH-1 works with all derailleur and 1/8" chain. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.

The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum

A range of sturdy, affordable cogs is an essential part of a fixie rider's quiver. Origin-8's Track Cog is available in a variety of sizes and is chrome plated to resist rust and increase longevity. Now you can easily tailor your ride for the terrain. And you can choose between 1/8 and 3/32-inch chain widths.

The Cult half link chain features teflon coating engraved with cult logos and is designed to help dial in the rear end length on frames with short dropouts. - Rounded side plates are compatible with 8T and larger drivers - Color: Black - Width: 1/2 x 1/8 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes

- 1/2" x 1/8" - 113 Links - Includes Pre Attached Offset Link - Single speed - 1/8" Track Bikes & BMX Racing, Freestyle - Heavy Duty

Problem Solvers Cog & Carrier adapts multi-speed Shimano HG freehubs for singlespeed use. - Wide-profile alloy cog carrier supports a single speed cog - 6-bolt chromoly cog included, compatible with 3/32" and 1/8" chains - Carrier is splined for Shimano HG freehub compatibility - Additional cogs available separately