700c, 27-Inch & 650c

The Metron RS 60 (Racing Series) full carbon wheelset is designed to go fast. Behind every Metron RS lies a process of engineering and perfection like no other. From CFD design to wind tunnel testing and meticulous manufacturing to extreme performance trials, these are not just wheels, they are the ultimate expression of Vision’s technology and performance. Built with full-carbon 60mm deep rims, carbon spokes and the new V-1000 hub with PRS technology, the Metron RS is designed to win.

Full carbon 60mm deep rims
2:1 aero bladed carbon spokes 21F / 24R, ABS self-locking nipples
Tubeless Ready, 23 mm inner width rim
P.R.S. hubs with Helical Clutch ratchet featuring 72T for a faster 5 degree engagement angle, and increases durability all while reducing loss of power engagement under load
6 sealed cartridge bearing (2F + 4R)
Artisan built, entirely by hand, coupled with state-of-the-art manufacturing processes

The Metron RS 45 (Racing Series) full carbon wheelset is designed to go fast. Behind every Metron RS lies a process of engineering and perfection like no other. From CFD design to wind tunnel testing and meticulous manufacturing to extreme performance trials, these are not just wheels, they are the ultimate expression of Vision’s technology and performance. Built with full-carbon 45mm deep rims, carbon spokes and the new V-1000 hub with PRS technology, the Metron RS is designed to win.

Full carbon 45mm deep rims
2:1 aero bladed carbon spokes 21F / 24R, ABS self-locking nipples
Tubeless Ready, 23 mm inner width rim
P.R.S. hubs with Helical Clutch ratchet featuring 72T for a faster 5 degree engagement angle, and increases durability all while reducing loss of power engagement under load
6 sealed cartridge bearing (2F + 4R)
Artisan built, entirely by hand, coupled with state-of-the-art manufacturing processes

Thanks to Zipp’s Total System Efficiency (TSE) carbon laminate and design, the Super-9 is engineered for a new era of wider tires and lower tire pressure in TT and triathlon. Combining Zipp’s wheel laminate with a wider rim profile and optimized tire interface helps you overcome the four barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The Super-9 is fastest with 28mm tubeless tires inflated to lower than traditional pressure. To ensure proper inflation, the Super-9 comes with the TyreWiz 2.0 tire-pressure monitor integrated out of sight and perfectly balanced so you’ll always know if you’re in your desired PSI/bar range. Inflation is a breeze with redesigned pump access. Moreover, the disc features a redesigned pump-access port—no stickers needed. The Super-9 features the premium ZR1 hub with ceramic bearings and 66 points of engagement. - Aero, durable, light weight - Tubeless compatibility for optimization of wider tires with lower tire pressure, lower rolling resistance, and increase grip and compliance - Greater stopping power and modulation of disc brakes - 23mm internal rim width - 28mm minimum and optimal tire size recommended - Integrated TyreWiz 2.0 tire pressure monitor and redesigned pump access cover - Low drag ceramic bearings for race day performance - Includes pumpchuck adapter and Zipp wheel bag

Designed to elevate ride feel on mixed terrain routes, from tarmac to gravel roads, Sharq is the result of painstaking research, advanced engineering and extensive work in design and testing, to achieve the best performance possible. Sharq wheels have an inner rim width of 25 mm, an effective compromise both for road tires with a minimum width of 30 mm, guaranteeing good aerodynamics and improved rolling resistance, as well as for wider knobby tires, which will have a solid support for off road use. To ensure that the rim can be used for tubeless systems and with inner tubes, it features mini-hooks that provide maximum safety. As is customary for Fulcrum the bridge is not drilled and, therefore, it is tubeless native, without the need for any additional tape. - Full-carbon rim with direct in-mold construction and matte finish, high rim profile 42 - 47mm - Two-Way fit design for tube and tubeless applications - Aluminum hubs with USB ceramic, Adj. Cup and Cone bearing system - Mo-Mag system: No holes on the rim means that the rim is uniform at every point, free from stress points or zones of weakness and, for the clincher profiles no rim tape is required, to the benefit of weight reduction - 24H, 2:1 spoke ratio with straight-pull, stainless steel, double butted spokes - Supports tire widths from 30mm to 65mm

Bringing cutting edge performance to the diverse needs of drop bar off-roaders, Reserve’s 40/44 GR gravel wheels are tailored for the demands of off-road exploration and gravel riding, but with an aero focus. Leveraging Turbulent Aero technology, the 40/44 GR features a 40mm front paired with a 44mm rear, establishing it as the fastest and most stable Reserve gravel wheelset to date. Wider than the previous gravel wheels to allow for tires up to 50c tires, the 40/44 GR plays nicely with today’s slew of big volume gravel tires and a semi-hooked rim makes tubeless set up easier than ever. - Designed to be your no fuss aero gravel riding and racing wheelset - Wider internal width of 27mm - Tubeless and tube compatible - Wide/low front mixed with narrow/tall rear for maximum stability, lowest weight and optimal aerodynamics - Internally reinforced spoke holes to strengthen the area where the rim sees the most force, around the spoke nipple. This provides for improved strength without adding unnecessary weight - Built with DT Swiss Hubs

The Metron 45 SL TL Disc is the tactical wheelset essential to your quiver. The Metron 45 is an “all-around” wheelset built to take you from climbing all the way to gravel or CX. Victorious on the Cyclocross course, the cobbles of the spring classics, and the torturous mountain stages in the Pro peloton, this wheelset can handle whatever you put them through. - Full Carbon wheelset produced with Vision reliability and high-performance technology - Tubeless ready design, with tubeless valve and rim tape included -45mm depth and 21 mm inner width - P.R.S. alloy hubs with 6 sealed cartridge bearing (2F + 4R) - 21 spoke front, 24 spoke rear, 2:1 laced, Aero bladed straight pull spokes and ABS locking spoke nipples - Artisan built, entirely by hand - Includes spoke protector, cassette spacer, and wheel bag

SOLiX G is built for gravel and adventure, using alumium spokes threaded directly in the hub flange. A continuously-phased five pawl freehub offers 605 points of contact translating to an ultra-fine .59° engagement. Reduced pawl rotation, decreased pawl spring pressure, optimized drive ring diameter, and updated contact seal layout bring resistance and freewheeling noise to a minimum.

• Zipp’s lightest disc brake wheel ever is the pinnacle for endurance riders and road racers. • Sawtooth rim profile for aero efficiency and TSE for all-around speed. • ZR1 SL hubset with ceramic bearings and 66 points of engagement. • Zipp AXS Wheel Sensor for accurate on-bike tire-pressure monitoring. • Optimized for 30mm tires. • At an ultralight weight, the wheelset is designed for road and is not approved for gravel riding. • Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile • Center locking rotor interface. Lockring is included with the wheels. • Lifetime warranty • 1310g • SRAM Model ID: WH-353-NSW-B1

The Zipp 202 NSW is crafted with the climbing specialist in mind - bringing weightless speed to the steepest of grades, empowering riders to reach the summit faster on our lightest wheelset ever. However, the 202 NSW does more than climb fast; it provides aero advantage for the race to the climb and is designed for confidence on the getaway descent. Building on the carbon layup found in the state-of-the-art 353 NSW, the 202 NSW features our Biomimetic Laminate which utilizes mixed-modulus carbon types to maximize stiffness at the spoke bed and toughness at the tire bed, mimicking the function of a muscle tendon. The carbon fibers selected for the outer diameter of the rim prioritize strength and durability to withstand impacts from the road, while the inner diameter of the rim uses higher modulus fibers to maintain consistent spoke tension under dynamic riding loads. The result is a rim design that allows for a sub-1100-gram wheelset that reacts to your every input without sacrificing durability and the aerodynamic advantage of its 35mm rim depth on the descent.
Features
- German-engineered ZR1 SL hubset with lightweight Alpina Hyperlite spokes in a 20-hole 2-cross configuration
- Ultra-corrosion resistant ceramic bearings and 66 points of efficient engagement, ensuring every watt is transferred smoothly to the road as you rise to the challenges ahead
- 35mm rim depth
- Weighs in at just 1090 grams
- 23mm inner rim width
- Lifetime Warranty

The 454 NSW Tubeless Disc-brake is the ultimate road racing wheelset; aerodynamically efficient and stable in all wind conditions. • Designed for tubeless tires at lower pressure for reduced rolling resistance and increased vibration damping • For the best combination of aerodynamics and rolling resistance gains a 28mm tire is recommended. • ZR1 SL hubset with ceramic bearings and 66 points of engagement. • SRAM Model ID: WH-454-NTLD-C1

The 858 NSW’s undulating 82mm-85mm deep rim shape is Zipp's highest performing design for aero efficiency and crosswind stability. A tubeless and hookless rim profile provides a seamless tire interface and minimized weight. The 23mm internal width is ideal for running wider tires with lower pressures for decreased rolling resistance. • Fastest with a 28mm tire • ZR1 SL hubset with ceramic bearings and 66 points of engagement • Lifetime Warranty • SRAM Model ID: WH-858-NTLD-D1

The Metron 60 SL TL is Vision’s Aero Stage Race wheelset. The Metron 60 is the one wheel you’ll ride once and won’t want to ride without again; it sits comfortably in the mid-range of Vision’s Metron rim depths and offers the most versatility in the line up. - Full Carbon wheelset produced with Vision reliability and high-performance technology - Tubeless ready design, with tubeless valve and rim tape included - 60mm depth and 21 mm inner width - P.R.S. alloy hubs with 6 sealed cartridge bearing (2F + 4R) - 21 spoke front, 24 spoke rear, 2:1 laced, Aero bladed straight pull spokes and ABS locking spoke nipples - Artisan built, entirely by hand - Includes spoke protector, cassette spacer, and wheel bag

- Origin8 Bolt high profile T700 UD carbon tubeless ready clincher with 255C high TG epoxy resin and Basalt braking surface - Origin8 Elite road hubs with anti-bite Shimano cassette body featuring 6 pawl/48 point/7.5-degree engagement - 20 hole QR front/24 hole QR rear road hubs laced with straight pull Sapim CX-Ray spokes - Weight: 708g front/850g rear - ISO-Road certified and assembled in the USA - Width ID (mm): 17.5 - Axle: QR - Rim Color: Blk - Rim Model: OR8 Bolt Carbon Road - Hub Model: OR8 RD-1110 Elite Road - O.L.D.: 100mm/130mm - Hub Color: Blk - Gears: 8-11s Cass - Brake Type: Rim - Spoke Type: Sapim CX-Ray BK - Spoke Count: 20F/24R - Wall: Dbl - Valve: PV - Type: Tubeless Compatible

DT Swiss has engineered the ultimate aerodynamic combination of wheel and tire interface in collaboration with Continental with a joint tire: the Aero 111 Wheel and tire combinations pre-chosen and designed to be as aerodynamically efficient as possible Tire Features: - Aero 111 tires features 48 `vortex generators` which greatly reduce drag across the entire wheel system freeing up additional wattage - Aero wheels have Aero 111 26mm front tire and GP 5000 STR 28mm rear tire (Front & rear sold separately) - Continental`s Black Chili compound and Vectran Puncture-resistant technology Wheel Features: - Latest ARC 1100 Dicut wheels feature a wider rim and improved aerodynamics - Available in several profile heights, the Dicut 55 is reactive and nimble, perfect for road racing - New redesigned rim shape offers lower drag and smoother airflow between tire and rim interface - The ARC1100 feature a new 180 Dicut Aero hubs as well as new Aero Lite II and Aero Comp II spokes for ultimate performance gains

• Zipp’s lightest disc brake wheel ever is the pinnacle for endurance riders and road racers. • Sawtooth rim profile for aero efficiency and TSE for all-around speed. • ZR1 SL hubset with ceramic bearings and 66 points of engagement. • Zipp AXS Wheel Sensor for accurate on-bike tire-pressure monitoring. • Optimized for 30mm tires. • At an ultralight weight, the wheelset is designed for road and is not approved for gravel riding. • Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile • Center locking rotor interface. Lockring is included with the wheels. • Lifetime warranty • 1310g • SRAM Model ID: WH-353-NSW-B1

The Zipp 202 NSW is crafted with the climbing specialist in mind - bringing weightless speed to the steepest of grades, empowering riders to reach the summit faster on our lightest wheelset ever. However, the 202 NSW does more than climb fast; it provides aero advantage for the race to the climb and is designed for confidence on the getaway descent. Building on the carbon layup found in the state-of-the-art 353 NSW, the 202 NSW features our Biomimetic Laminate which utilizes mixed-modulus carbon types to maximize stiffness at the spoke bed and toughness at the tire bed, mimicking the function of a muscle tendon. The carbon fibers selected for the outer diameter of the rim prioritize strength and durability to withstand impacts from the road, while the inner diameter of the rim uses higher modulus fibers to maintain consistent spoke tension under dynamic riding loads. The result is a rim design that allows for a sub-1100-gram wheelset that reacts to your every input without sacrificing durability and the aerodynamic advantage of its 35mm rim depth on the descent.
Features
- German-engineered ZR1 SL hubset with lightweight Alpina Hyperlite spokes in a 20-hole 2-cross configuration
- Ultra-corrosion resistant ceramic bearings and 66 points of efficient engagement, ensuring every watt is transferred smoothly to the road as you rise to the challenges ahead
- 35mm rim depth
- Weighs in at just 1090 grams
- 23mm inner rim width
- Lifetime Warranty

The 454 NSW Tubeless Disc-brake is the ultimate road racing wheelset; aerodynamically efficient and stable in all wind conditions. • Designed for tubeless tires at lower pressure for reduced rolling resistance and increased vibration damping • For the best combination of aerodynamics and rolling resistance gains a 28mm tire is recommended. • ZR1 SL hubset with ceramic bearings and 66 points of engagement. • SRAM Model ID: WH-454-NTLD-C1

The 858 NSW’s undulating 82mm-85mm deep rim shape is Zipp's highest performing design for aero efficiency and crosswind stability. A tubeless and hookless rim profile provides a seamless tire interface and minimized weight. The 23mm internal width is ideal for running wider tires with lower pressures for decreased rolling resistance. • Fastest with a 28mm tire • ZR1 SL hubset with ceramic bearings and 66 points of engagement • Lifetime Warranty • SRAM Model ID: WH-858-NTLD-D1

More than iconic, the Bora Ultra WTO 45 wheels find the right balance of speed, agility and stability, making them the perfect choice for all-round riders. These wheels are an Italian masterpiece, refined through rigorous testing and proud craftmanship to be a leader in their space. Now even lighter, thanks in part to its Hand Made Ultra-Light Carbon (HULC) construction, the Bora Ultra WTO 45 has slimmer Aero Elliptical spokes and hidden nipples to help slice through the air. Campagnolo’s CULT ceramic bearings spin effortlessly within the front disc hub’s aerodynamic carbon body, and the 2-Way Fit rims are ready for immediate tubeless use without rim tape. - 45mm deep, UD high-strength carbon rim construction with C-LUX finish, 2-Way Fit system and 23mm internal width can accommodate wider tires, including tubeless - Bora ULTRA disc brake hubs and CULT ceramic bearings, 21 Aero Elliptical, straight-pull double-butted spokes - Possess pure control with G3 lacing, designed to ensure maximum stiffness and cornering precision – and stunning, premium aesthetics - Recommended tire size: 700c, 28 - 35mm - Includes Aero Mo-Mag nipple maintenance kit, Tubeless valve, AFS lockring, Campagnolo wheel bag, Campagnolo accessories bag and tire levers

The latest generation of ARC 1100 DiCut wheels were developed in cooperation with Swiss Side, a leading expert in aerodynamic optimization. Consequently, the new AERO+ rim profile minimizes both aero drag and steering moment to improve its aerodynamic and controlling in even strong cross wind. Thus, it makes it easier for the rider to keep the aero wheel under control while taking advantage of the forward-pushing sailing effect. The wheel setup is completed by the new DT Swiss aero spokes in combination with the sleek 180 DiCut hub including ultra-light running SINC ceramic bearings. - 180 DiCut aero hub with 36t Ratchet EXP system and SINC ceramic bearings provide an extremely tough and wear- and corrosion-resistant ceramic material - Carbon, hooked and crotchet tubeless compatible rim - ARC 1100 DiCut 38: The ultimate climbing wheel combining light weight and aero-optimization for a swift rise to the top - DT Aerolite II and Aerocomp II spokes with Pro Lock alloy nipples

Various road surfaces or weather conditions cannot deter you: the endurance-specific ERC 1100 wheels enable you to ride fast and stable. With AERO+ optimized rim profiles, wider and more comfortable tires are better supported. Ultra low-friction SINC Ceramic bearings inside DICUT Aero hubs and the latest generation of DT Swiss aero spokes are technical highlights inside the wheels. The proven Ratchet EXP freehub system with its 36T Ratchets transfers each pedal stroke precisely into forward propulsion and speed from the start right to the finish of your ride. - Aero-optimized wheels with Carbon rim supports your ride on different road profiles. Whether you enjoy an easier longer climb or the following smooth descend, riding will feel almost effortless

Various road surfaces or weather conditions cannot deter you: the endurance-specific ERC 1100 wheels enable you to ride fast and stable. With AERO+ optimized rim profiles, wider and more comfortable tires are better supported. Ultra low-friction SINC Ceramic bearings inside DICUT Aero hubs and the latest generation of DT Swiss aero spokes are technical highlights inside the wheels. The proven Ratchet EXP freehub system with its 36T Ratchets transfers each pedal stroke precisely into forward propulsion and speed from the start right to the finish of your ride. - Aero-optimized wheels with Carbon rim supports your ride on different road profiles. Whether you enjoy an easier longer climb or the following smooth descend, riding will feel almost effortless

The GRC 1100 DICUT gravel wheels are designed for multiple situations, with two rim height options available to meet your needs. Whether you’re on the hunt for a win in a fast-paced gravel race with the 50mm high rim, or looking to unhook yourself from your limitations on an extreme off-road adventure with the 30mm high rim, these wheels are sure to catch the eye, while saving weight with improved aero-optimization.



- Built using a state-of-the-art carbon manufacturing process, resulting in lightweight carbon rims straight out of the mold, without the need for a finishing coat

- Assembled with the lightweight 180 DICUT hub with ceramic bearings and DT Aerolite spokes, providing fast acceleration and low rolling resistance

- Intended use = Gravel/Off-road

- Ratchet EXP freehub drive system

- Includes tubeless valve, tape and wheel bag

- Tubeless ready, 24mm wide carbon rim with 30mm high profile rim

The GRC 1100 DICUT gravel wheels are designed for multiple situations, with two rim height options available to meet your needs. Whether you’re on the hunt for a win in a fast-paced gravel race with the 50mm high rim, or looking to unhook yourself from your limitations on an extreme off-road adventure with the 30mm high rim, these wheels are sure to catch the eye, while saving weight with improved aero-optimization.



- Built using a state-of-the-art carbon manufacturing process, resulting in lightweight carbon rims straight out of the mold, without the need for a finishing coat

- Assembled with the lightweight 180 DICUT hub with ceramic bearings and DT Aerolite spokes, providing fast acceleration and low rolling resistance

- Intended use = Gravel/Off-road

- Ratchet EXP freehub drive system

- Includes tubeless valve, tape and wheel bag

- Tubeless ready, 24mm wide carbon rim with 50mm high profile rim

The Emporia GC3 Pro is very light, super tough, built with a 26mm internal width to make your tires work great – all here in our Minnesota factory. We have been racing gravel since 2008, when our new (at the time) 23mm wide C2 rims were the best gravel wheels in existence. With a solid 15 years and many thousands of miles of graveling to guide us, we’re confident that the GC3 Pro wheels are the best available. We designed them here and cut our own molds. We fabricate the rims right here from sheets of raw carbon. We hand build those rims into wheels. When you ride them you’ll be fast, surefooted, and free to worry about other things (like maybe keeping the dust out of your eyes). Rim Type: Carbon / Hookless Front Wheel Weight: 655g Rear Wheel Weight: 770g Brake Type: Centerlock Freehub Type: HED 5-pawl Bearing Type: 6902 Stainless Spokes: Sapim Laser J-bend Spoke Lacing: Two Cross Minimum Tire Size: 32mm

Bringing cutting edge performance to the diverse needs of drop bar off-roaders, Reserve’s 40/44 GR gravel wheels are tailored for the demands of off-road exploration and gravel riding, but with an aero focus. Leveraging Turbulent Aero technology, the 40/44 GR features a 40mm front paired with a 44mm rear, establishing it as the fastest and most stable Reserve gravel wheelset to date. Wider than the previous gravel wheels to allow for tires up to 50c tires, the 40/44 GR plays nicely with today’s slew of big volume gravel tires and a semi-hooked rim makes tubeless set up easier than ever. - Designed to be your no fuss aero gravel riding and racing wheelset - Wider internal width of 27mm - Tubeless and tube compatible - Wide/low front mixed with narrow/tall rear for maximum stability, lowest weight and optimal aerodynamics - Internally reinforced spoke holes to strengthen the area where the rim sees the most force, around the spoke nipple. This provides for improved strength without adding unnecessary weight - Built with DT Swiss Hubs

Developed and tested using Turbulent Aero technology, the 42/49 is designed for everything you do, providing all-day capability with aerodynamic sensibilities. Raced at events as varied as the Paris-Roubaix and the Giro D’Italia, the 42/49 wheels have a lifetime warranty supported by a no-fault crash replacement. And in keeping with Reserve workmanlike ways, you’ll find external nipples, standard spokes, no tire limitations with a semi-hooked design and no rider weight limits. - Wind tunnel tested using Computational Fluid Dynamics (CFD), with the goal of maximizing aerodynamics while enhancing stability - Optimized carbon fiber rim construction allows Reserve to define the exact fiber orientation for each rim model, to maximize stiffness and strength without sacrificing weight - Built with DT Swiss Hubs

Reserve returns with the ultimate climbing wheelset; the 34/37 Turbulent Aero. Developed using Turbulent Aero data and technology, the 34/37 TA is designed to help get you up those mountain passes as fast as possible. Comparted to the original 34/37, the revised TA set is 30 grams lighter per rim, and 4 grams faster in the wind tunnel. And in keeping with Reserve workmanlike ways, you’ll find external nipples, standard spokes, no tire limitations with a semi-hooked design and no rider weight limits. - Designed to be your no fuss climbing wheelset. There are no weight limits, no tire limitations, and can be set up tubeless or with tubes - Mixed profile front and rear rims provide maximum stability, lowest weight and optimized aerodynamics - Internally reinforced spoke holes to strengthen the area where the rim sees the most force, around the spoke nipple. This provides for improved strength without adding unnecessary weight - Lifetime warranty supported by a no-fault crash replacement - Built with DT Swiss Hubs

More than iconic, the Bora Ultra WTO 45 wheels find the right balance of speed, agility and stability, making them the perfect choice for all-round riders. These wheels are an Italian masterpiece, refined through rigorous testing and proud craftmanship to be a leader in their space. Now even lighter, thanks in part to its Hand Made Ultra-Light Carbon (HULC) construction, the Bora Ultra WTO 45 has slimmer Aero Elliptical spokes and hidden nipples to help slice through the air. Campagnolo’s CULT ceramic bearings spin effortlessly, and the 2-Way Fit rims are ready for immediate tubeless use without rim tape. - 45mm deep, UD high-strength carbon rim construction with C-LUX finish, 2-Way Fit system and 23mm internal width can accommodate wider tires, including tubeless - Bora ULTRA disc brake hubs and CULT ceramic bearings, 21 Aero Elliptical, straight-pull double-butted spokes - Possess pure control with G3 lacing, designed to ensure maximum stiffness and cornering precision – and stunning, premium aesthetics - Recommended tire size: 700c, 28 - 35mm - Includes Aero Mo-Mag nipple maintenance kit, Tubeless valve, AFS lockring, Campagnolo wheel bag, Campagnolo accessories bag and tire levers

Thanks to its new 23mm wider rim and contained weight, the Cosmic SL 65 offers maximum aerodynamic performances on flat terrain. It also has enough frontal and lateral stiffness for a touch of versatility. Aero Wide Rim: Unmatched speed, control, and comfort combo. - Our wider rims ensure a seamless rim-to-tyre transition, slashing micro-turbulence. - Rolling resistance is significantly decreased, delivering a superior handling in crosswinds, and a smoother, faster ride even on rough terrain thanks to a wider yet shorter footprint and lower riding pressure. Improved responsiveness - The reduced inertia of the rim combined with INFINITY hub technology means instant acceleration. Adaptive Layup: Strong where it matters, light everywhere else - Carbon is lighter than alloy, but weight always add up. - Using the right amount of fibers where the rim is less stressed to reduce rim weight with no compromise on reliability, this gives wheels that are livelier and more enjoyable while climbing. Up to 70g saved per rim.