Filter By:

  • Show More Brands

  • Show Fewer Brands

29-Inch

DT Swiss M 1900 Spline 22.5
$168.00 - $282.00
All-mountain products need to make long climbs tolerable and tame wild singletrack trails. The light, wide, tubeless-optimized rim means that the M 1900 SPLINE is more than up to the challenge and always looks good with its reliable, lightweight, high-quality pawl hubs.
DT Swiss M 1700 Spline 25
$348.00 - $519.00
Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.
DT Swiss M 1700 Spline 30
$361.00 - $532.00
Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?
DT Swiss H 1700 Spline 30
$394.00 - $526.00
It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
DT Swiss XR 1501 Spline ONE 22.5
$526.00 - $737.00
The new 22.5mm-wide Cross Country specific XR 1501 SPLINE ONE comes with all the advancements of a modern cross country rim, only at 2.5mm more width, providing more air volume for the same size tire which creates more traction and comfort. The asymmetric rim further improves spoke angles, making the wheel even stiffer, more precise handling, and more responsive. The specially developed process for surface hardening and the gentle anodizing result in an unsurpassed surface durability at no additional weight.
DT Swiss EX 1501 Spline ONE 25
$539.00 - $750.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
DT Swiss XR 1501 Spline ONE 25
$552.00 - $750.00
Responding to the demand from top racers for even wider rims, DT have developed an XC-specific 25mm-wide rim profile. This is what's built into the XR 1501 SPLINE ONE 25. The result is a super capable, super light Cross Country wheel. It feels perfectly at home on the trails that have become tougher and rougher both up and down the mountain. And built with DT Swiss quality in every detail, from the hub internals to the spoke nipple, it makes sure you complete all the laps, weekend after weekend.
DT Swiss EX 1501 Spline ONE 30
$565.00 - $776.00
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
DT Swiss XM 1501 Spline ONE 30
$565.00 - $776.00
The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires it will eat up the roughest of descents you can throw at it, and it will climb to those trailheads with ease. Really the perfect size for demanding all mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.
DT Swiss HX 1501 Spline ONE 30
$611.00 - $809.00
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
DT Swiss XRC 1200 Spline 25
$1,185.00 - $1,633.00
The new standard in modern day, high performance cross ccountry wheel sets. Coming with a generous 25mm wide hookless full carbon and tubeless-ready rim, the XRC 1200 SPLINE 25 strikes the perfect balance between low weight and aggressive riding readiness. The lean, CNC machined hubs are super-light while the 25mm tall rim has the inherent stiffness necessary for efficient riding and to precisely hold a line. Together with the renowned DT Swiss build quality, this wheel is what everyone looking to go fast up and down has been waiting for.
DT Swiss XMC 1200 Spline 30
$1,224.00 - $1,672.00
The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheel set.
ENVE M630 29-inch I9 Wheelset
$2,550.00
What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.
ENVE M730 29-inch I9 Wheelset
$2,550.00
This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, the M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy-absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.
ENVE M735 29-inch I9 Wheelset
$2,550.00
This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, the M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy-absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.
Quality Wheels SRAM 406 6-bolt / Sun SR25 29-inch Front
$85.00
Quality Wheels Value Series Disc Front Wheel 29 SRAM 406 6-bolt / Sun SR25 Black
Quality Wheels SRAM 406 6-bolt / Sun SR25 29-inch Rear
$95.00
Our best value in Quick-release disc wheels.
Quality Wheels Formula Convertible / WTB Asym i29 29-inch Rear
$190.00
Formula hubs on WTB Asym rims. - QR endcaps installed - Includes 142mm x 12mm endcaps - Includes QR skewer - Requires 34mm tubeless rim tape
Race Face Aeffect R 29-inch Rear
$324.99
Boasting a 30mm internal rim width and increased strength, the Aeffect R is built to shred aggressive all-mountain trails and Enduro races. In addition to a great rim, the Aeffect R incorporates a new Race Face Trace hub design with full cartridge bearings for extended life and durability. The hub also boasts a competitive 9.2-degrees of engagement using a durable the 3 pawl design. These hubs are tough, think a clydesdale with a motor kind of tough. Aeffect wheels can handle almost anything you can throw at them. - Brushed finish, water transfer graphics - One spoke length throughout wheelset - Rim decal kits available separately in 8 colors (sold separately) - 9.2-degree hub engagement - Standard 6 bolt brake rotor mount - Extra spokes (5) included with rear wheels - Straight pull Double Butted spokes with Silver Brass nipples
Santa Cruz Reserve 27 29-inch Wheelset
$1,599.00 - $2,199.00
Five years ago, Santa Cruz debunked every skeptic's fear about the long-term durability of carbon fiber bicycle frames. Now they are doing the same for wheels. Santa Cruz Reserve wheels are built on the highest quality carbon rims on the market. Their confidence in the design and strength of the wheels is backed up by a lifetime warranty, just like Santa Cruz frames.
Spank Spike Race 33 29-inch Wheelset
$529.00
- High performance alloy wheelset competition tuned for World Cup level DH racers - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - A hand built 32H, 3-cross configuration ensures maximum stiffness and durability offering increased engagement, lighter weight, and improved adaptability - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - 15mm and 20mm axle adapters included for front wheels - Most non Boost adapters available for the rear wheel
Spank Oozy Trail 395+ Wheelset
$649.00
Open the door to the plus size revolution, without closing it behind you! SPANK Industries’ OOZY Trail 395+ wheelset is an ultra-wide, hand built and trued wheelset that’s optimized for plus size tires, yet is seamlessly compatible with a wide variety of modern high volume tire options. New 32H straightpull OOZY Trail Hubs with increased engagement and adaptability, were designed with unique over-sized SSL (single spoke length) flanges to deliver enhanced stiffness, durability, and spoke torque retention. Equipped with OOZY Trail 395+ rims, the OOZY Trail 395+ Wheelset combines the strength and durability of Dynamal alloy with the stiffness of SPANK’s iconic Oohbah rim profile. Next generation Bead Bite anti-burp tubeless rim hooks instill confidence and tubeless security even at minimal tire pressures. - Key technologies: Bead Bite, OohBah, Bead Nip, Dynamal Alloy, MGR - Front Hub (mm): 6 bolt disc mount - Rear Hub (mm): 6 bolt disc mount - Freehub: alloy - Shimano (XD available) - Adapters Included: FRONT: 20 x 110mm REAR: QR x 135mm - Adapters Available (mm): FRONT: QR / 15x100 / 20x110 REAR: QRx135 / 10x135 / 12x135 / 12x142 - Tubeless: Tubeless equipped (tape & valves included) - Discipline: Trail
Spank Spank 350 29-inch Wheelset
$649.00
- Weight optimized wheelset ideal for Trail/AM/Enduro bikes looking for a wide profile - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles
Spank 350 Vibrocore 29-inch Wheelset
$699.00
- High performance Wheelset with internal vibration damping, ideal for DH and Freeride. - Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles.
Stan's NoTubes Arch S1
$201.00 - $479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Stan's NoTubes Crest S1
$278.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Crest S1 Wheelset - Use: Aggressive Cross Country and Trail - Internal Rim Width: 23mm - Optimal Tire Size: 2.0 to 2.25-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,649g ), 27.5-inch (1,731g), and 29-inch (1,813g)
Stan's NoTubes Arch MK3 29 Front Wheels
$309.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps
Stan's NoTubes Crest MK3 29 Front Wheel
$309.00
Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim
Stan's NoTubes Flow MK3 29 Front Wheels
$309.00
The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples
Stan's NoTubes Baron MK3 29-inch Front
$319.00
The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra-low-profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. The Baron MK3 wheelset includes the Neo hub with CNC-machined shell and updated axle and bearing placement for maximum durability. The cassette body has six pawls for quick engagement and reliable power transfer on the trail. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. Baron MK3 wheels include pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps. - Patented BST rim shape for improved handling and less rolling resistance with high volume tires - Maximum stability and control with 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Neo hubs with new Durasync freehubs accelerate quicker - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80 – 3.20-inch Trail tires
Page 1 of 2 Next page