Wheels

The ENVE 45 is a modern multi-purpose road wheel in every way. Riders with inclinations toward racing and hard solo efforts will find the rim's drag-taming and cross-wind defying shape a welcome upgrade to their rides. Those with inclinations towards the road lost and forgotten will find the rim's width and anti-pinch flat technology complementary to higher-volume tubeless road tires. All said, the ENVE 45 is everything that the dynamic modern road rider needs, and nothing that they don't. - Application: Road, Road Race, Triathlon, All-Road - Internal Rim Width: 21mm - Tire Compatibility: Tubeless 25c or larger - Wheelset Weight: 1541g - Real World Foundation Aero Technology - Wide Hookless Bead provides pot-hole protection - Tubeless Optimized for Rolling Fast and Fewer Flats - Lifetime Incident Protection and 5 Year Factory Warranty - Handmade in Ogden, Utah

The ENVE 65 is a modern speed specialist in every way. Triathletes and road racers seeking PRs in their objectives against the clock will find their efforts rewarded by the ENVE 65. - Application: Road Race, Triathlon, Time-Trial - Internal Rim Width: 21mm - Compatible Tire Size: Tubeless 25c or larger - Wheelset Weight: 1641g - Real World Foundation Aero Technology - Wide Hookless Bead provides pot-hole protection - Tubeless Optimized for Rolling Fast and Fewer Flats - Lifetime Incident Protection and 5 Year Factory Warranty - Handmade in Ogden, Utah

Wheels of the deep-dish — greater than 50mm — variety excel on flat courses, but very often we find ourselves on courses riddled with hills. Now, if they were just long drawn out grades, then any deep-dish would do. But all too often, they are of the brutal switchback variety where drafting is quickly negated. The HED Jet 6 Plus Clincher is a wheelset for the switchbacks. It's a dangerous cliche to say that the Jet 6 is a 'one-quiver' wheel, but that's exactly how HED designed it. It's heavier than a traditional climbing wheelset, but for most moderate hills, it's still more efficient and inherently faster. Over the past 26 years of engineering wheels, Steve Hed's end goal remains the same: simply make them as fast as possible. So, it's almost a given that HED aerodynamics are superb. However, what you might not know is that these wheels' aerodynamics are equally matched by their low rolling resistance. We have HED's C2 rim concept concept to thank for this. Essentially, C2 is about reduction of the two C's — less Cda (aerodynamic drag) and less Crr (rolling resistance). Accordingly, a 25mm rim width makes this possible, and is mainly responsible for the wider-is-better campaign that's been replicated throughout the market. But, you're certainly wondering, why wider? Well, the width provides what can be described as an 'aero shroud' for the rest of the wheel. This also changes the nature of the tire's contact patch with the road. However, HED also knows that faster speeds require a heightened sense of control. This becomes evident through HED testing, as it found that rim depths which cross the forty or fifty-millimeter threshold grow increasingly more difficult to handle in crosswinds. So, HED engineered a solution that it calls Stability Control Technology, or SCT. In regards to the wheel shape, at 0-15 degree yaw angles, SCT reduces the force put on the wheels by side winds. This makes the Jet 6's 60mm depth handle more like a 30 or 40mm deep wheel in crosswinds. HED laces the rims to its Sonic hubs, which feature silky ABEC5 bearings on oversized axles — 12mm in front and 15mm in rear. Oversized axles flex less, resulting in smoother bearing loads and less mechanical drag. And its not only the axle that received a bigger-is-better treatment, as the hub flanges are spaced as wide apart as possible in order to create a stronger bracing angle. And again, this results in increased lateral stiffness. Easing the maintenance to the rear hub, HED included a grease port and carbon port cap. True, it's a subtle convenience, but rejoice that this capped port ensures that you'll no longer need to rebuild your rear hub after repeated washings. As we mentioned, the fairing is bonded to the rim, which means that the spokes engage at the rim rather than at the end of the fairing. The result is not only an increase to aerodynamics, as there are no exposed nipples, but also to an increase in lateral strength. However, like all wheels, there are nipples, and for them, HED used Sapim hex-headed aluminum nipples. These are treated with a light thread-locking compound and are accessed from inside the rim. They anchor the venerable Sapim CX-Ray spokes. The 18 front spokes are straight-pull, while the 24 rear spokes are J-bend for both sides. At the rear, you'll notice a two-cross lacing pattern on both sides. HED did this for a simple reason — with ever-stiffer frames, the force of stomping on the pedals was increasing force on the wheels, which has in turn reduced mechanical efficiency. To counteract these forces, HED stiffened up the rear wheel so that no power would be lost to wheel flexing, thus putting more power into driving the bike forward. The HED Jet 6 Clincher Wheelset is available with either a Campagnolo or Shimano compatible freehub body. Please note that both freehub bodies accept 11-speed cassettes, and that they're easily swapped out with two 5mm hex keys. The wheels come with HED steel-shafted skewers, valve extenders, and rim strips. Also worth mention is that HED does NOT recommend these wheels for riders exceeding 190lbs.

Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction. - Designed for XC riding and racing - Carbon fiber construction with 2.8mm asymmetric offset - Step-in internal rim bed to ease tubeless installation - Lower profile for added lateral stiffness with increased vertical compliance - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

While DT's Hybrid Endurance wheels are made to deliver maximum speed on tarmac, the Hybrid Gravel wheels will deliver maximum fun on gravel roads. The HGC 1400 Spline is the exclusive answer for all high-end E-gravel bikes that set the benchmark in a new cycling segment. With a select mix of high-end E-specific components, this wheel has the pedigree to be the uncontested King of E-gravel. - 3 cross spoke pattern, DT AeroComp Hybrid straight pull spokes, DT Pro Lock hidden aluminum spoke nipples

The CADEX 36 Disc WheelSystem is a versatile, lightweight composite wheel built for real-world performance. Featuring a hookless rim design with optimal 22.4mm internal width and 36mm depth, it delivers unbeatable acceleration and climbing efficiency as well as confident handling on descents, in the wind and on varied terrain. - Precision reinforced lay-up places carbon fiber only where needed, creating a strong, stiff rim structure weighing in at only 1302 grams. - Dynamic Balanced Lacing technology produces a stiffer, more efficient wheel with outstanding power transfer. - High tensile strength CADEX aero carbon spokes minimize lateral flex for more efficient acceleration and climbing. - The 22.4mm inner rim width creates an increased actual tire contact patch for better traction and impact absorption, better handling, more confidence and less rider fatigue. - CADEX hookless rim technology features a broad inner rim width and durable continuous carbon fiber structure, helping create a rounder tire shape for superior grip and handling plus added sidewall support when cornering, all without compromising weight. - The precision machined low-friction R1-C30 hub significantly reduces bearing load as CADEX ceramic bearings further increase efficiency by offering lower rolling resistance and 1.5x smoother action than steel. - A low 36mm rim profile offers excellent stability in shifting winds.

Introducing the Gravel racing GRC 1400. With a holistic approach of engineering DT re-thought the characteristics of a modern benchmark setting gravel wheel set. Aerodynamic efficiency, ideal support of wide gravel tires leading to comfort and traction off-road as well as remarkable durability are only some of the key features that make this wheel set the perfect companion for your next gravel adventure. - 42mm aero-optimized rim depth for 35mm wide gravel tires - 36T RatchetSystem technology

Unsure what will happen on your group ride? Mountains, hills, or flats? Water from below, water from above? You needn't worry, the PRC 1400 SPLINE 35 has it covered. High-end, bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, these wide and stiff full carbon rims accelerate with the best of them.

If you're a proponent of the new trend of stealth styling for high-end road machines, then you're also likely a fan of carbon and disc-brake wheels because they omit an aluminum rim brake's bright, decidedly un-stealth brake strip. With the HED Ardennes Plus Black, you can enjoy the consistent stopping power of alloy rims without sullying the matte black-on-black finish of your race rig with the silver stripe of alloy shame. As alluded to above, the most striking feature of the Ardennes Plus Black wheels is the black finish of the brake tracks, which are the result of HED's Turbine Braking Technology. HED claims this design nets some pretty impressive numbers, including stopping distances in dry and wet conditions that are reduced by 25% and 70%, respectively, and brake power consistency that enjoys a claimed 5x increase over non-Black rims. While HED is jealously guarding the details of this process for obvious reasons, we do know that it's the result of a proprietary process of machining and anodizing, and we suspect that the gains are mostly attributable to the former while the latter is just a welcome aesthetic flourish. Other than those improvements to the brake track, the Ardennes Plus Black is essentially a rebranded version of HED's previous Ardennes Plus king, the FR. The tubeless-ready rim is still a lightweight alloy whose stiffness ensures that the end product can be made with less material — and therefore lower weight — than comparable alloy hoops. It's also got the low spoke count of the previous model, which keeps weight down while taking advantage of the wider rim's increased resistance to torsional and lateral flex. The Ardennes Plus Black wheels also see a return of HED's Sonic Silver model, only rebranded and — of course — re-colored. They run ABEC5 bearings on oversized axles, 12mm in front and 15mm in the rear. The flanges are spaced as widely as possible to create a stronger bracing angle, resulting in lateral stiffness that any rider approaching HED's suggested weight limit of 225 pounds will appreciate. The front hub has a carbon-fiber tube with aluminum end caps. The rear is aluminum with exaggerated flanges and a grease port, so you can power wash and re-lube the wheels as needed. Both skewers have titanium shafts, and the ratchet ring in the rear hub is also titanium. Finally, please note that HED suggests using brand new brake pads with these the Ardennes Plus Black rims. The same metal shavings that hide out in used pads and tend to destroy carbon wheels may also damage the Black rims' finish. C2 Alloy rims 24.5mm rim depth Turbine Braking Technology Tubeless-ready

CRC 1400 Spline wheels are ready to conquer the harshest conditions with convenience. Never mind if the conditions are windy, muddy or rainy, the CRC 1400 Spline is ready to conquer them all. The aero-optimized rim supports your high speeds on descents and on the hunt for your competitors, no matter where the wind blows. The rim profile is tubeless ready, allowing you to take advantage of the technology and simply and conveniently change the tires according to the prevailing conditions of the track. This will ensure you always find the sweet spot between traction and rolling resistance. - Full carbon tubeless ready rim, laced to a straight pull 240s based hub - Tubeless tape 25mm - Tubeless valve road 32mm

A hookless bead and precision reinforced carbon layup create an exceptionally strong structure with best-in-class weight. A 25mm inner rim width produces a more uniform tire shape and better handling. The innovative 60-tooth ratchet freehub and ultrasmooth ceramic bearings deliver a responsive feel, while high-tensile-strength carbon spokes and Dynamic Balanced Lacing boost lateral stiffness. It all adds up to class-leading speed, efficiency and durability for superior all-road performance.

As with most things wheel-related, HED proved itself an (extremely) early adapter when its late founder launched a disc wheel almost three decades ago. HED being HED, since that first unveiling, the Minnesota-based manufacturer has been constantly tinkering with and updating the profile, structure, hub, brake track and every other aspect of the wheel. The Jet Plus Carbon Disc Wheel is the latest iteration, bringing the increased stability, comfort, and rolling speed of an expanded rim width to a wheel that HED calls "the epitome of speed." The secret to the Plus build's ride quality lies in the expanded tire volume afforded by a the wider, 25mm rim. Since the tire's bead sits fatter, the tire itself follows suit, which serves to make a plusher ride with less PSI required while reducing rolling resistance by putting a healthier patch of tire on the tarmac. It also straightens the sidewalls, which means you'll also have more tire contact while cornering, a benefit that goes some way toward addressing the handling issues associated with disc wheels and TT bikes. The tire also sits more flush with the rim, creating an unbroken plane that better manages air flow across the tire/wheel transition, improving yet further on the aerodynamic benefits of a disc wheel. As with every other Jet model, the Jet Disc Plus is built with a carbon fairing sandwiching 24 14-guage spokes and attached to an alloy spine. The benefits of this construction are immediately obvious to anyone who has experienced dodging carbon brake tracks when the pace is interrupted by a crash in the group or the advent of a sudden obstacle. The Jet Disc Plus' aluminum brake track grabs with more confidence and provides better modulation. It also doesn't scream under hard braking like its carbon counterpart, which both you and anyone in the vicinity will appreciate on pre-work training rides on an otherwise silent, peaceful morning. The one drawback to this construction model is weight, but since disc wheels typically prove most useful in long, flat events, the aluminum spine's slight addition of weight won't hinder a time trialist or triathlete up a climb. In fact, once the wheel is spun up, its slightly higher weight means that it's got more inertia, so it actually helps you maintain cruising speed by carrying extra momentum through its rotation. In terms of aerodynamics, the Jet Disc Plus obviously crushes the standard 32-spoke wheel and bests every deep section wheel out there. HED's research has found that the wheel does best at yaw angles in excess of five degrees, with the sweet spot ranging from 15-20 degrees. To quantify its speed, HED claims that the wheel has 25g of drag at 15-degrees of yaw when riding at 40kph. That's 195g less drag than a conventional wheel ? an estimated 18w savings for every second you're riding. For the Jet Disc Plus, the skewer graduates from the non-plus model's steel to a lighter titanium. HED also includes rim tape, the omission of which was a strange oversight on the previous generation. A valve extender is included and, given the rim's width, HED recommends using that extender to inflate tires that are 22mm or wider, but we see no reason to not take advantage of the comfort of riding 23 or 25mm tires. HED also recommends a max tire pressure of 100PSI.

CRC 1400 Spline wheels are ready to conquer the harshest conditions with convenience. Never mind if the conditions are windy, muddy or rainy, the CRC 1400 Spline is ready to conquer them all. The aero-optimized rim supports your high speeds on descents and on the hunt for your competitors, no matter where the wind blows. The rim profile is tubeless ready, allowing you to take advantage of the technology and simply and conveniently change the tires according to the prevailing conditions of the track. This will ensure you always find the sweet spot between traction and rolling resistance.

Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps

Campagnolo's aerodynamic Bora WTO Disc Brake wheel with a 45mm profile is designed to appeal to a broader customer base. The design of the rim enables maximum aerodynamic penetration, and at certain angles, the wind can actually become a valuable ally to the rider. The wheel features carbon rims with a unidirectional aerodynamic finish, aerodynamic aluminum hubs, and the ceramic USB cup-and-cone bearing system: every design choice has been made with a view to optimizing performance. - 24-spoke elliptical cross section results in a superior rolling resistance Specifications: - Hub/Brake Compatibility: Center-Lock Disc - Cassette Body Type: Shimano/SRAM 11 Speed Road - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Tire Type: Tubeless Ready Clincher

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

27.5+ is here to stay, and we’re here to dominate it. With new bikes, new wheel sizes, and new options, every rider can have the perfect ride around their local terrain. More and more people are seeing the benefits of larger tires, and plus-size (3-inch) tires are finding a niche between fat bikes and skinny 2 - 2.5” mountain bike tires. Since we can’t seem to do anything half way, we wanted to bring out the widest, lightest, and most durable all-carbon rim for your 27.5+ rig – the Raptor. With a width of 45 millimeters, and an astounding rim weight of 430 grams, the Raptor will shock you with its speed. No longer must your plus-sized bike be heavy, slow, and lumbering – let the Raptor inject some True Speed into your trail ride. BUILD OPTIONS: We offer built wheels in four hand builds: 1) Hed Brickhouse hubs for retrofitting existing fat bikes - $2,100/pr. 2 & 3) Onyx and I9 boost hubs are also available as stock builds. Onyx - $2,280, I9 $2,225. 4) Send existing hubs for complete build is the fourth option - $1650. Black Pillar PSR1420 spokes and alloy nipples complete the build. Tech Notes 1. Do NOT use tire levers on Raptor carbon rims!!! 2. For all types of bicycle wheels, a hard strike on the rim is likely to result in rim damage. At the point of impact, an aluminum rim will dent, and a carbon rim may delaminate. With any such damage to a Hed wheel, our lifetime crash replacement policy enables the original owner to repair or replace the wheel at substantial savings.

The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. - Built to provide ultimate riding agility for light eMTBs - Perfect balance between low weight and resistance, ready to go faster in the ups and the downs - Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight - The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency - Ratchet EXP OS, optimized for the requirements of an eMTB, with a bigger threaded ring for direct acceleration through a torque-resistant freehub system

Cyclocross racers and gravel grinders around the world rejoiced when HED released a disc brake compatible version of its venerable Ardennes Plus wheelset. The HED Ardennes Plus SL Disc Brake Clincher Wheelset is the lightest of the Ardennes Plus Disc line and delivers a beefy rim width for those wide cross and gravel tires, combining sure-footed handling and lightning-fast spin up. Whether you're rocking an old-school steel or high-fashion carbon frame, this wheelset adds an unmistakably plush and efficient ride to the adventure. The Ardennes Plus takes HED's C2 rim design even a step further compared to the standard Ardennes profile. Two additional millimeters of width result in an improved tire profile for even better grip and faster rolling. The wider rim puts more of the tire on the ground, and that increased contact patch means more grip, especially while cornering. Better yet, by widening the tire's base, more of the sidewall is oriented vertically, which means the tire is better able to deform around surface irregularities, so you'll roll through them, not over them. And just in case you're looking for the fastest rolling setup around, the Plus SL is compatible with tubeless setups in addition to traditional clincher tires with tubes. HED laces the Plus SL's to its Sonic Disc hub in the front, with wide flanges for impeccable stiffness and resistance to torsional forces. The rear hub is HED's new 545 J-bend hub, featuring five pawls and 45 teeth for lightning-fast engagement to torque over steep inclines and technical terrain. HED uses its Lite bladed steel spokes in the Plus SL to provide additional weight savings over the LT and GP versions. The HED Ardennes Plus SL Disc Brake Clincher Wheelset is compatible with centerlock rotors. It comes with quick-release skewers and tubeless rim tape, but thru-axle conversion kits are available separately. Please note that HED recommends a maximum tire pressure of 100 PSI for these rims.

The Ardennes SL Disc Brake Tubular Wheelset combines the supple ride of tubs with a rim wide enough for all-terrain use and a braking system designed to maintain consistent response and modulation in the conditions that tend to define 'cross racing. It's also the lightest member of HED's big-rim/disc-brake team, replacing the LT model's standard spokes with HED Lite bladed steel spokes. Despite their relatively low weight, the disc brakes and 23mm rims recommend the Ardennes SL Disc Wheelset for adventures whose scope transcends asphalt. Road, gravel, fire roads, 'cross — with a width like this, the wheelset's only limitations are your legs and imagination. The wide gluing surface lets tubs sit fat, putting a larger tire patch in contact with the ground, improving rolling efficiency in the straights, increasing cornering confidence and grip, and further supplementing the plush, supple feel of tubular tires. They also provide a more constant surface from tire to rim, creating less turbulence and thereby reducing drag. The rims are laced to HED's 545 hubs, whose freehub engagement involves five pawls and 45 teeth. Given this naming convention, the previous model of HED hub — with three pawls and 30 teeth — might have been dubbed the 330. Whatever the case, the numbers don't lie; the 545 has almost double the engagement points as its predecessor, which can pay big dividends while clearing obstacles, punching up steep pitches, and accelerating out of corners on cyclocross courses.

Our all-rounder. A 240 hub combined with a carbon rim results in a durable and versatile package. The low weight of the carbon rim, specially designed for all-mountain use, combined with the latest evolution of the 240 hub with RATCHET EXP freewheel, make the XMC 1501 SPLINE ONE wheels the perfect partner in crime for all kinds of mountain adventures. The 30mm inner width of the tubeless-optimized carbon rim provides excellent support for the wide tubeless tire. Double-butted competition race spokes and the highest quality wheel construction round off our XMC 1501 SPLINE ONE wheels.

Made for modern XC tracks—240 hub + 30 mm carbon rim = super-fast! Tailored to the needs of performance-oriented cross-country riders, the XRC 1501 SPLINE ONE leaves nothing to be desired. The light, 30mm-wide carbon rims offer ideal support for modern XC tires. Rolling on race-proven and super-durable 240 hubs with RATCHET EXP freehub system, every bit of your energy is transferred into forward motion via equally racy double-butted spokes and a perfect wheel build.

Turn your XC bike into an XC rocket with Giant's light, stiff P-XCR0 27.5-inch Composite wheels. The go-fast magic comes from the wheel's 25mm-wide carbon, tubeless-ready rim — it's more than ready to slay your favorite trails. Giant supplies the aluminum hub shells, and DT Swiss provides their renowned star rachet internals, as well as their Aerolite bladed stainless steel spokes, and aluminum nipples for unparalleled ride quality, strength, and speed.

- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - M-pulse hubs - 250lb Recommended Maximum Rider Weight

The ARC 1400 DiCut wheels also benefit from the AERO+ profile supporting safe riding in the aero position through optimal aerodynamics. The combination of new and proven aero components allows cyclists to control many riding situations at high speeds. - AERO+ optimized rims by Swiss Side - Stainless steel bearings

The ARC 1400 DiCut wheels also benefit from the AERO+ profile supporting safe riding in the aero position through optimal aerodynamics. The combination of new and proven aero components allows cyclists to control many riding situations at high speeds. - AERO+ optimized rims by Swiss Side - Stainless steel bearings

Wherever the road takes you, the ERC 1400 wheels with AERO+ optimized rim profiles allow you to stay in control during your extended endurance ride. Ride longer distances effortlessly thanks to wider and more comfortable tires. Each pedal force is transferred into propulsion and speed onto the 240 DICUT Aero hub and DT aero comp t-head spokes. Simply enjoy your ride along the way. - Fast and light, Aero-optimized wheels for those longer rides on various terrains along your route. Ride comfortably and handle your bike safely even in fast descends

Introducing the Gravel racing GRC 1400. With a holistic approach of engineering DT re-thought the characteristics of a modern benchmark setting gravel wheel set. Aerodynamic efficiency, ideal support of wide gravel tires leading to comfort and traction off-road as well as remarkable durability are only some of the key features that make this wheel set the perfect companion for your next gravel adventure. - 42mm aero-optimized rim depth for 35mm wide gravel tires

DT's benchmark setting aero+ rim matched to a mix of top and end spokes and premium hub makes for a wheel that delivers in all conditions. Fitting 28mm tires to it's wide rims will give you all the comfort and grip needed for mixed surface rides. Using 25mm tires will aero-optimize your race bike. - Spline 240S based hub - Straight-pull hub/spokes built with 2-cross pattern - Includes factory installed tubeless tape, tubeless valve and valve guard

High end, bladed straightpull spokes and the most reliable and light weight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip and lightweight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them. So the PRC 1400 SPLINE 35 is ready for anything, are you? - Spline 240S based hub