Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

Campagnolo Bora Ultra 35 Clincher Wheelset
$3,610.00
In order to answer the call from Nairo Quintana and the other champions, Campagnolo created the Bora Ultra 35: perhaps the best wheel out there in terms of performance both while climbing and on mixed routes. The Bora Ultra's innovative AC3 (All Conditions Carbon Control) Technology means maximum safety when braking in any condition, providing shorter stopping distances and excellent braking modulation. And, thanks to its wide, aerodynamic profile, differentiated hub diameter, and CULT bearings, all cyclists can now enjoy the same performance Campagnolo provides its Pro-Tour champions. - 35mm carbon profile offers maximum lightness and aerodynamics - Designed for domination uphill and on the flats - CULT bearings deliver up to nine times the smoothness of standard bearings and are designed to resist oxidation, preserve performance over time - Carbon rim and hubs ensure good stiffness and extremely low weight - Aerodynamic profile spokes slice through the air - Exclusive G3 spokes ensure better balancing of the traction force on the wheel, drastically reducing all its stress - Weight: 1,360 grams
Campagnolo Bora Ultra 50 Clincher Wheelset
$3,610.00
Innovating the wheel that for years has been a market benchmark might have seemed difficult and risky, but the Campy Tech Lab designers have managed to maintain those characteristics of flexibility and ease of handling that have made this high-profile wheel easy to steer, high performing and safe. The Bora Ultra 50 bursts onto the market not only with introduction of the new tire bed dedicated to the clincher, but also with improvements to the previous version in terms of lightness, aerodynamics, stiffness and comfort thanks to use of the new wider rim and front and rear hubs with different diameters. The 2018 range sees the addition of the new AC3 (All Conditions Carbon Control) Technology braking track, which brings braking safety on wet terrain closer to that on dry. Plus, extremely clean-cut aesthetics guaranteed by innovative water-transfer graphics. All without giving up on the extreme smoothness, which has become the market benchmark and is the result of use of CULT bearings. - 50mm Full Carbon rim guarantees the best quality available on the market - Long-lasting smoothness is ensured by CULT bearings, nine times better performing than a standard solution - Internationally one-of-a-kind AC3 technology guarantees unique performance by the Bora Ultra 50 also when braking - Excellent grip between brake pad and rim allows for gradual, constant braking and shorter stopping distances, even in wet conditions - Dedicated brake pads (red compound) guarantee reliability and durability - Aerodynamic spokes, wider profile, carbon hubs, CULT bearings, self-locking aluminum nipples, oversize flanges and much more - The distinctive G3 design of the rear wheel guarantees excellent stiffness and an unmistakable look - Weight: 1,435 grams
ENVE SES 2.2 ENVE Carbon Hub Wheelset
$3,000.00
What It Is An SES featured climbing wheel featuring the latest in ENVE brake track technology. Who it's for Climbing specialists seeking a wheelset that inspires confidence regardless of terrain or weather conditions. Why we made it To give you every advantage when riding through mountainous terrain and unpredictable weather conditions. The Smart ENVE System 2.2 is the ultimate climbing wheel with aerodynamic properties that refine stability in the most extreme wind and weather conditions. As such, lightweight trumps drag reduction with the SES 2.2. The SES 2.2 underwent in-frame development in the Mercedes GP-Petronas wind tunnel in order to define the final shape of the rim. Unlike the other SES wheelsets, the SES 2.2 features the same rim geometry front to rear. In terms of tire fitment, the SES 2.2 is developed to be used with 25mm tires and the clincher version of the rims is tubeless compatible. Because the SES 2.2 is designed to be ridden through the mountains, it was important to improve the performance levels of our molded brake track texture technology. As such, the SES 2.2 is the first SES rim to feature our new molded-in brake track texture. This new brake track texture improves braking performance by as much as 30% over the previous brake track and performs as well in wet conditions as it does in dry. Each SES 2.2 wheelset includes 2 pair of our new black brake pads which have been specially formulated to improve braking power, modulation, and wet weather performance. The combination of the new brake track and black brake pad compound delivers the ultimate in rim brake technology.
ENVE SES 7.8 Clincher ENVE Carbon Hub Wheelset
$3,000.00
What It Is The fastest carbon fiber Smart ENVE System aero wheel yet. Who It's For Experienced triathletes and road racers seeking maximum aero performance and stability. Why We Made It We made the SES 7.8 to achieve two things: more speed and more stability. The SES 7.8 embodies the latest SES technologies and includes our newest molded-in brake track and tubeless clincher tire compatibility. The SES 7.8 is wider and specifically optimized to perform best when used with a modern aero frame and large, 25mm tires. Full Details When the race is against the wind and the clock the SES 7.8 is optimized for the task. By reducing the trade-offs between aerodynamics, stability, weight, and stiffness, the SES 7.8 carbon fiber aero wheel is the perfect tool for road racing and triathlon alike. The SES 7.8 features front- and rear-specific rim geometries. The front rim is 71mm deep and 29mm wide, while the rear rims is 80mm deep and 27.5mm wide. The dissimilar rim geometries improve the efficiency of the airflow in the system of bike frame and wheels. Because running 25mm tires is now standard, the SES 7.8 was designed with larger tires in mind. Additionally, frame manufacturers are now producing frames that have more clearance between wheel and frame which has opened up the design scope for a wheelset. The SES 7.8 is optimized for these frames. In addition to changes in shape and structure, the SES 7.8 features the latest molded-in carbon fiber brake track texture and is compatible with road tubeless tires.
Zipp Super-9 Disc Carbon Rear Wheel (Clincher)
$2,731.00
Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.
Campagnolo Bora One 35 Disc Brake Clincher Wheelset
$2,550.00
Campagnolo has developed a totally reworked disc brake version of the Bora One that transfers skills and knowledge gained in years of experience and introduces a new logic and innovative technologies to ensure unprecedented results. The Bora One Disc Brake is the most sophisticated carbon wheel on the market and one of the few specifically designed for disc brake systems. It is extremely light yet stiff, resistant to shock and perfectly balanced: a versatile wheel for any kind of route. - Use of resins and materials that guarantee superior finish and good UV resistance - Designed specifically for disc brake systems - Lightweight uphill thanks to its 35mm rim - Smooth and safe downhill thanks to its USB bearings - The layers of carbon are hand positioned to ensure the perfect equilibrium of weight and performance - Monolithic aluminum hubs optimize disc braking torque - Weight: 1483 grams
ENVE SES 3.4 Disc ENVE Alloy Wheelset
$2,550.00
What It Is A climbing wheel with an aero advantage designed to be ridden in the mountains and optimized for use with modern disc brake road bikes. Who it's for Road cyclists who require maximum versatility for riding in mountainous terrain and variable weather conditions. Why we made it Since the introduction of the original SES 3.4, we’ve implemented new design concepts across the SES lineup that result in a faster wheel and improved ride experience. The SES 3.4 features road tubeless compatibility, 25mm tire optimization, molded carbon brake track technology, and optimized SES aero rim shaping to ensure maximum efficiencies for a shallow aero wheel. Equally at home in the mountains as in the valleys, the SES 3.4 Disc is the most versatile Smart ENVE System aero wheel. Like all SES wheel models, the SES 3.4 features dissimilar rim shapes and geometries between the front and back wheels to maximize aerodynamic efficiency and rideability in variable wind and weather conditions. The front rim is 38mm deep and shallower than the rear rim to aid in crosswind stability while rear rim is 42mm deep and therefore improves overall airflow.
ENVE SES 7.8 Clincher ENVE Alloy Hub Wheelset
$2,550.00
What It Is The fastest carbon fiber Smart ENVE System aero wheel yet. Who It's For Experienced triathletes and road racers seeking maximum aero performance and stability. Why We Made It We made the SES 7.8 to achieve two things: more speed and more stability. The SES 7.8 embodies the latest SES technologies and includes our newest molded-in brake track and tubeless clincher tire compatibility. The SES 7.8 is wider and specifically optimized to perform best when used with a modern aero frame and large, 25mm tires. Full Details When the race is against the wind and the clock the SES 7.8 is optimized for the task. By reducing the trade-offs between aerodynamics, stability, weight, and stiffness, the SES 7.8 carbon fiber aero wheel is the perfect tool for road racing and triathlon alike. The SES 7.8 features front- and rear-specific rim geometries. The front rim is 71mm deep and 29mm wide, while the rear rims is 80mm deep and 27.5mm wide. The dissimilar rim geometries improve the efficiency of the airflow in the system of bike frame and wheels. Because running 25mm tires is now standard, the SES 7.8 was designed with larger tires in mind. Additionally, frame manufacturers are now producing frames that have more clearance between wheel and frame which has opened up the design scope for a wheelset. The SES 7.8 is optimized for these frames. In addition to changes in shape and structure, the SES 7.8 features the latest molded-in carbon fiber brake track texture and is compatible with road tubeless tires.
Santa Cruz Reserve 27 29-inch Wheelset
$1,599.00 - $2,199.00
Five years ago, Santa Cruz debunked every skeptic's fear about the long-term durability of carbon fiber bicycle frames. Now they are doing the same for wheels. Santa Cruz Reserve wheels are built on the highest quality carbon rims on the market. Their confidence in the design and strength of the wheels is backed up by a lifetime warranty, just like Santa Cruz frames.
DT Swiss PRC 1100 DICUT 24 25Y Rear
$2,127.00
PRC 1100 DICUT 25Y Edition: when tradition meets the future. A unique wheelset created to celebrate the 25th anniversary of our brand, the PRC 1100 DICUT 25Y edition combines traditional technology with an innovative development approach. With a super lightweight build of just 1311g, it is our lightest carbon clincher disc brake wheelset ever. The 180 hub contains the brand-new Ratchet EXP technology that offers less weight, increased stiffness, and extra precision. And, last but not least, our guiding principle of engineering performance provides the rider with the unquestionable quality that lies at the core of this product. - Shimano/SRAM 11-speed road cassette-compatible
HED JET 4 PLUS BLACK
$2,100.00
The advantages of deep, carbon rims are evident to anyone who has ever held 20-25 mph on flat, straight roads for an extended period. The disadvantages are equally evident, and they usually manifest as unresponsive, obnoxiously-loud braking or equally poor and obnoxious handling when a sudden crosswind throws you across the road. HED's Jet 4 Plus Black wheels remedy both issues with rim shaping and the newly improved Black braking track. The most striking feature setting the Jet Black models apart from the regular Jets is the black finish of the brake track, which is the result of HED's Turbine Braking Technology. HED claims this design nets some pretty impressive numbers, including stopping distances in dry and wet conditions that are reduced by 25% and 70%, respectively, and brake power consistency that enjoys a claimed 5x increase. It's also important to keep in mind that, since the Jets use an aluminum brake track, these are increases over the exceptional braking of alloy rims, not the poor braking of carbon, so the Jet Black models easily enjoy the most consistent stopping power of any aerodynamic wheels in the industry. This better-than-alloy brake track is also, obviously, black. We unashamedly admit that this appeals because it doesn't interrupt the otherwise stealth look of the 46mm carbon rims with a bright, silver brake strip. HED claims that the carbon fairings mounted to the Black rims loses 50-90 grams of aerodynamic drag compared to a conventional wheelset, which translates to around 25-40 seconds over 40k or five to eight watts per second. Those gains don't come at the expense of handling, though, as the blunted inner edge of the rim manages lateral air flow better than a true NACA airfoil design. The rims response to sudden gusts and side winds is more predictable, so while it's still affected, the handling stays intuitive rather than violent. The rims' aerodynamic savings are compounded by a reduction in the rolling resistance because of the Jet 4's 25mm wide C2 rims, which increases the tire's volume and contact patch for lower rolling resistance, more grip in corners, and a more vertically-oriented side wall that is better able to deform around irregularities in the road surface. You can run a lower PSI for increased comfort without sacrificing efficiency. The tire shape also means the transition air makes from the edge of the tread to the end of the rim is smoother, resulting in still less aerodynamic drag. The Sonic Black hubs are virtually the same as the previous Sonic models, running ABEC5 bearings on oversized axles with wide flanges for a stiff, lateral bracing angle that any rider approaching HED's suggested weight limit of 225 pounds will appreciate. The rear hub has high flanges and a grease port, so you can power wash and re-lube the wheels as needed. Both quick-release skewers have titanium shafts, and the ratchet ring in the rear hub is also titanium. Please note that HED suggests using brand new brake pads with the Jet 4 Plus Black wheels. The same metal shavings that hide out in used pads and tend to destroy carbon wheels may also damage the Black rims' finish.
HED JET 6 PLUS BLACK
$2,100.00
If you're an advanced enough initiate in your craft to be eyeing 60mm rims, then you probably don't need us to extol the virtues of the magic feeling aerodynamic wheels like HED's Jet 6 Plus Black bestow at speed. You're probably also familiar with the negative qualities of braking that tend to afflict deep carbon rims, and this is where we — or more precisely, the Jet 6 Plus Black wheels — can educate you. Instead of dodgy, screaming carbon brake tracks, the Jet 6 Black rims feature a specially machined and anodized alloy surface that HED calls Turbine Braking Technology. This surface nets claimed reductions in stopping distance of 25% and 70% in dry and wet conditions, respectively, and a 5x increase in braking consistency. Keeping in mind that this is in comparison to aluminum rims, not carbon, it's safe to assume that the Jet 6 Black wheels provide the most consistent braking in their category. We suspect that HED's unwillingness to divulge the secrets behind those gains might have less to do with the fact that it's jealously-guarded proprietary technology and more to do with the fact that it's some sort of black magic. Maybe. But you're here primarily for speed, not stopping, and HED also knows that faster speeds require a heightened sense of control that's often at odds with wheels of this depth. HED's Stability Control Technology (SCT), which reduces force put on the wheels by side winds at 0-15 degree yaw angles. This makes the Jet 6's 60mm depth handle with the intuitive predictability of a 30 or 40mm deep wheel with a true NACA airfoil cross section when the wind gets unruly. The rims' aerodynamic savings are compounded by a reduction in the rolling resistance because of the Jet 6's 25mm wide C2 rims. C2 rims increase the tire's volume and contact patch for lower rolling resistance, more grip in corners, and a more vertically-oriented side wall that is better able to deform around irregularities in the road surface — all of which translates to being able to run a lower PSI for increased comfort without sacrificing efficiency. The tire shape also means the transition air makes from the edge of the tread to the end of the rim is smoother, resulting in still less aerodynamic drag. The Sonic Black hubs are virtually the same as the previous Sonic models, running ABEC5 bearings on oversized axles with wide flanges for a stiff, lateral bracing angle for more efficient power transfer. Both quick-release skewers have titanium shafts, and the ratchet ring in the rear hub is also titanium. Please note that HED suggests using brand new brake pads with the Jet 6 Plus Black wheels. The same metal shavings that hide out in used pads and tend to destroy carbon wheels may also damage the Black rims' finish.
HED JET 9 PLUS BLACK CARBON DISC BRAKE WHEELSET - CLINCHER
$2,100.00
HED's Jet 9 Plus Black Carbon Disc Brake Wheelset goes straight to the extreme of road braking, upstaging questionable carbon braking, alloy rim braking, and even the vastly improved Jet Black brake track with the superior stopping power of disc brakes. Disc brakes also virtually ensure that carbon wheels will never violently deform after reaching the glass transition temperature as a result of constant braking on long, hot descents. HED also knows that anyone interested in 90mm rims is looking primarily for faster speeds, not faster stopping, and HED's Stability Control Technology (SCT) ensures that the increased aerodynamics don't come with handling that throws you around in crosswinds. SCT involves rounding the rim's spoke face and sidewall profile to reduce force put on the wheels by side winds at 0-15 degree yaw angles. While 90mm rims will obviously never handle crosswinds like box clinchers, the rounded inner face of SCT design does give the deep dish monsters more intuitive predictability than wheels with a true NACA airfoil cross section. The Jet 9s also feature HED's signature 25mm C2 rim width, which increases tire volume and contact patch for lower rolling resistance, more grip in corners, and a more vertically-oriented tire sidewall that is better able to deform around irregularities in the road surface — all of which translates to being able to run a lower PSI for increased comfort without sacrificing efficiency. The wheels are finished with HED's own Sonic Black hubs, which run ABEC5 bearings on oversized axles with wide flanges for a stiff, lateral bracing angle and more efficient power transfer. The rear hub has high flanges and a capped grease port, so you can power wash and re-lube the wheels as needed. Both quick-release skewers have titanium shafts, and the ratchet ring in the rear hub is also titanium. Please also note that HED recommends a maximum tire pressure of 100PSI.
HED JET 9 PLUS BLACK CARBON WHEELSET - CLINCHER
$2,100.00
HED's Jet 9 Plus Black Carbon Wheelset is the same wheelset Optum p/b Kelly Benefit Strategies' Zirbel rode to victory at the North Star Grand Prix except for two differences: stopping power is improved with HED's Turbine Braking Technology and the graphics are murdered-out for a stealth look. While aesthetics are subjective, the improved braking means that these wheels are actually better than those ridden by a multiple national time trial champion with one of the biggest engines in the domestic scene. Instead of dodgy, screaming carbon brake tracks or the standard alloy on Zirbel's set, the Jet 9 Black rims feature the specially machined and anodized alloy surface mentioned above. This surface nets claimed reductions in stopping distance of 25% and 70% in dry and wet conditions, respectively, and a 5x increase in braking consistency. Keeping in mind that this is in comparison to aluminum rims, not carbon, it's safe to assume that the Jet 9 Black wheels provide the most consistent braking in their category. But like Zirbel, you're interested in the Jet 9 wheels primarily for speed, not stopping, and HED also knows that faster speeds require a heightened sense of control that's often at odds with wheels of this depth. That's where HED's Stability Control Technology (SCT) comes in by reducing force put on the wheels by side winds at 0-15 degree yaw angles. While 90mm rims will obviously never handle crosswinds like box clinchers, the rounded inner face of SCT design does give the deep dish monsters more intuitive predictability than wheels with a true NACA airfoil cross section. The Jet 9s also feature HED's signature 25mm C2 rim width, which increases tire volume and contact patch for lower rolling resistance, more grip in corners, and a more vertically-oriented sidewall that is better able to deform around irregularities in the road surface — all of which translates to being able to run a lower PSI for increased comfort without sacrificing efficiency. The wheels also feature the Sonic Black, which run ABEC5 bearings on oversized axles with wide flanges for a stiff, lateral bracing angle and more efficient power transfer. The rear hub has high flanges and a capped grease port, so you can power wash and re-lube the wheels as needed. Both quick-release skewers have titanium shafts, and the ratchet ring in the rear hub is also titanium. Please note that HED suggests using fresh brake pads with the Jet 9 Plus Black wheels. The same metal shavings that hide out in used pads and tend to destroy carbon wheels may also damage the Black rims' finish. Please also note that HED recommends a maximum tire pressure of 100 PSI.
HED JET 6 PLUS BLACK CARBON DISC BRAKE WHEELSET - CLINCHER
$2,000.00
At this point in the development of wheel technology, the aerodynamic benefits of HED's Jet 6 Plus Black Carbon Disc Brake Wheelset are collectively taken as an industry truism. Ditto the cross-wind stability granted by the bullet-shaped inner face of the carbon fairing. The disc brake capabilities of these wheels are still something of a novelty on road racing kit, with proponents and detractors pitching their cases on the world's largest cycling stage in Europe. By combining its proven aerodynamic technology with the nascent trend of discs on tarmac, HED helps advance the pro-disc contingent's case that superiority of disc brakes will be the industry's next assumed truth. We've had the opportunity to ride several models of road disc brakes, and we can understand why HED is keen to make this transition. Discs do away with one of our greatest critiques of carbon rims — the questionable braking — for stopping power that modulates better, grabs with more consistency, and virtually ensures that the Jet 6s will never violently deform because they hit the glass transition temperature as a result of a long, hot descent. While the new road disc technology may be responsible for stopping a cyclist on these wheels, their strongest selling point is definitely the boost they provide while they're going. Again, the 60mm profile is an aerodynamic truism, but HED also knows that faster speeds require a heightened sense of control that's often at odds with wheels of this depth. HED's Stability Control Technology (SCT), which reduces lateral forces at 0-15 degree yaw angles. This makes the Jet 6's 60mm depth handle unruly wind with the intuitive predictability of a 30 or 40mm deep wheel that has a traditional NACA airfoil cross section. The rims' aerodynamic savings are compounded by a reduction in the rolling resistance because of the Jet 6's 25mm wide C2 rims. C2 rims increase the tire's volume and contact patch for lower rolling resistance, more grip in corners, and a more vertically-oriented side wall that is better able to deform around irregularities in the road surface — all of which translates to being able to run a lower PSI for increased comfort without sacrificing efficiency. The tire shape also means the transition air makes from the edge of the tread to the end of the rim is smoother, resulting in still less aerodynamic drag. The Sonic Black hubs are virtually the same as the previous Sonic models, running ABEC5 bearings on oversized axles with wide flanges for a stiff, lateral bracing angle for more efficient power transfer. The rear hub has high flanges and a capped grease port, so you can power wash and re-lube the wheels as needed. Both quick-release skewers have titanium shafts, and the ratchet ring in the rear hub is also titanium. Deep, aerodynamic wheels with durability and solid braking Disc brakes address the main concern with carbon wheels Generous internal width for lower PSI and a more efficient ride Alloy spine reinforces the rim against cobbles and gravel Carbon fairing extends all the benefits of deep dish rims HED is one of the original pioneers in aerodynamic wheelsets
DT Swiss ARC 1100 Dicut 48 Rear
$1,728.00
The punchers wheel: The medium-profile aero rim, partly bladed spokes, and lightweight build make it easy to flow with the pack and launch your punchy attack when the time is right. Even in the harshest weather conditions the ARC 1100 DICUT 48 will lead you rapidly to the line. Combining carbon know-how with SWISS SIDEs leading aero knowledge, this wheel epitomizes lightweight and low drag. The aero hub design, featuring straight pull nail-head spokes and SINC ceramic bearings, make it stiff and smooth rolling — just right to surprise the lead-out train.
DT Swiss XMC 1200 Spline 30 27.5-inch Rear
$1,672.00
The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheelset.
DT Swiss EXC 1200 SPLINE 30 Rear
$1,606.90
Learning from our very successful EWS riders, we designed the rims for the EXC 1200 SPLINE 30 to be tough enough for everything the best in the sport can throw at them yet light enough to spin all day. And, they're the right width to accommodate today's high-volume enduro tires. This rim is complemented by our completely new top-end Ratchet System hubs which maintain the lightweight theme, as do the bladed and butted straight-pull spokes. The result is any enduro rider's dream wheel: Peace-of-mind in the downhills and enough breath for a chat on the climbs.
DT Swiss EXC 1200 SPLINE 35 Rear
$1,606.90
Learning from our very successful EWS riders, we designed the rims for the EXC 1200 SPLINE 35 to be tough enough for everything the best in the sport can throw at them yet light enough to spin all day. And, they're the right width to accommodate today's high-volume enduro tires. This rim is complemented by our completely new top-end Ratchet System hubs which maintain the lightweight theme, as do the bladed and butted straight-pull spokes. The result is any enduro rider's dream wheel: Peace-of-mind in the downhills and enough breath for a chat on the climbs. - SRAM XD MTB cassette-compatible
DT Swiss XMC 1200 SPLINE 30 27.5-inch Rear
$1,606.90
The XMC 1200 SPLINE 30 is the ultimate all-mountain wheel. A carbon layup specifically tuned for all-mountain use makes the rim tough, yet super-light. And, with a 30mm internal width, it's made for wide rubber. The hubs feature the latest incarnation of our Ratchet System for smooth, rapid engagement and reliability. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed, top-end spokes and perfect DT Swiss build quality, this wheelset is made to ride trails with speed and confidence. - SRAM XD MTB cassette-compatible
ENVE AM30 650B Wheelset
$1,600.00
ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology
HED JET 6 PLUS CARBON ROAD WHEELSET - CLINCHER
$1,599.95
Wheels of the deep-dish — greater than 50mm — variety excel on flat courses, but very often we find ourselves on courses riddled with hills. Now, if they were just long drawn out grades, then any deep-dish would do. But all too often, they are of the brutal switchback variety where drafting is quickly negated. The HED Jet 6 Plus Clincher is a wheelset for the switchbacks. It's a dangerous cliche to say that the Jet 6 is a 'one-quiver' wheel, but that's exactly how HED designed it. It's heavier than a traditional climbing wheelset, but for most moderate hills, it's still more efficient and inherently faster. Over the past 26 years of engineering wheels, Steve Hed's end goal remains the same: simply make them as fast as possible. So, it's almost a given that HED aerodynamics are superb. However, what you might not know is that these wheels' aerodynamics are equally matched by their low rolling resistance. We have HED's C2 rim concept concept to thank for this. Essentially, C2 is about reduction of the two C's — less Cda (aerodynamic drag) and less Crr (rolling resistance). Accordingly, a 25mm rim width makes this possible, and is mainly responsible for the wider-is-better campaign that's been replicated throughout the market. But, you're certainly wondering, why wider? Well, the width provides what can be described as an 'aero shroud' for the rest of the wheel. This also changes the nature of the tire's contact patch with the road. However, HED also knows that faster speeds require a heightened sense of control. This becomes evident through HED testing, as it found that rim depths which cross the forty or fifty-millimeter threshold grow increasingly more difficult to handle in crosswinds. So, HED engineered a solution that it calls Stability Control Technology, or SCT. In regards to the wheel shape, at 0-15 degree yaw angles, SCT reduces the force put on the wheels by side winds. This makes the Jet 6's 60mm depth handle more like a 30 or 40mm deep wheel in crosswinds. HED laces the rims to its Sonic hubs, which feature silky ABEC5 bearings on oversized axles — 12mm in front and 15mm in rear. Oversized axles flex less, resulting in smoother bearing loads and less mechanical drag. And its not only the axle that received a bigger-is-better treatment, as the hub flanges are spaced as wide apart as possible in order to create a stronger bracing angle. And again, this results in increased lateral stiffness. Easing the maintenance to the rear hub, HED included a grease port and carbon port cap. True, it's a subtle convenience, but rejoice that this capped port ensures that you'll no longer need to rebuild your rear hub after repeated washings. As we mentioned, the fairing is bonded to the rim, which means that the spokes engage at the rim rather than at the end of the fairing. The result is not only an increase to aerodynamics, as there are no exposed nipples, but also to an increase in lateral strength. However, like all wheels, there are nipples, and for them, HED used Sapim hex-headed aluminum nipples. These are treated with a light thread-locking compound and are accessed from inside the rim. They anchor the venerable Sapim CX-Ray spokes. The 18 front spokes are straight-pull, while the 24 rear spokes are J-bend for both sides. At the rear, you'll notice a two-cross lacing pattern on both sides. HED did this for a simple reason — with ever-stiffer frames, the force of stomping on the pedals was increasing force on the wheels, which has in turn reduced mechanical efficiency. To counteract these forces, HED stiffened up the rear wheel so that no power would be lost to wheel flexing, thus putting more power into driving the bike forward. The HED Jet 6 Clincher Wheelset is available with either a Campagnolo or Shimano compatible freehub body. Please note that both freehub bodies accept 11-speed cassettes, and that they're easily swapped out with two 5mm hex keys. The wheels come with HED steel-shafted skewers, valve extenders, and rim strips. Also worth mention is that HED does NOT recommend these wheels for riders exceeding 190lbs.
DT Swiss PRC 1400 Spline 35 Disc
$1,092.00 - $1,514.00
Unsure what will happen on your group ride? Mountains, hills, or flats? Water from below, water from above? You needn't worry, the PRC 1400 SPLINE 35 has it covered. High-end, bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, these wide and stiff full carbon rims accelerate with the best of them.
Zipp 808 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,500.00
There’s nothing middle of the road about the 808 Firecrest. At 82mm deep, it’s all out aero. Thanks to refinements to Zipp’s revolutionary Firecrest rim shape to be tubeless compatible and optimized for wider tires, the 808 Firecrest Carbon Clincher Tubeless Disc brake is ideal for the new era of disc brake road riding and racing. Without the constraints of rim brake caliper compatibility or brake-track requirements, the Firecrest Carbon Clincher Tubeless Disc-brake wheels offer the increased stopping power and modulation of disc brakes and a whole lot more. To maximize the aero performance of the wheels, Zipp’s ABLC dimples extend all the way to the outer edge of the disc-specific rims. The wheels are also optimized for wider tires to meet the performance needs of modern riders in search of low rolling resistance and aero efficiency with high comfort. The deeper Firecrest Tubeless Disc brake has an internal width of 19mm and are aerodynamically optimized for 25mm wide tires. This design improves Firecrest’s ability to yield low aerodynamic drag and high crosswind stability, a combination called AeroBalance. Designed to be tubeless compatible, the wheels feature a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance even when ridden at lower tire pressures. Zipp’s low rolling resistance and high grip Tangente RT28 and RT25 Road Tubeless tires pair well with the Firecrest disc brake wheels. A new carbon fiber layup for the Indianapolis-made rims keeps weight low while maintaining the Firecrest Carbon Clincher’s proven durability. The robust 77D/177D hubset, paired with 24 Sapim CX-Sprint spokes front and rear, keeps the wheels stiff and responsive. To ensure compatibility with any bike, the versatile 77D/177D hubs come with swappable end caps to work with QR’s and thru-axles, including 12x100mm and 15x100mm front thru-axles as well as 12x142mm rear thru-axles. The 177D rear hub is also XDR driver body compatible for use with SRAM 10-42 cassettes. Each Wheel Includes: - Zipp Tangente Quick Release Skewer - Zipp Tubeless valve – factory installed - Tubeless rim tape – factory installed - Valve core removal tool - Zipp 77D/177D thru-axle caps to fit 12x100, 15x100 dropouts for front wheels, and 12x142 dropouts for rear wheels - Freehub body spacer – 11 to 10 speed - SRAM XDR driver body for 177D available separately
HED ARDENNES PLUS BLACK
$1,499.95
If you're a proponent of the new trend of stealth styling for high-end road machines, then you're also likely a fan of carbon and disc-brake wheels because they omit an aluminum rim brake's bright, decidedly un-stealth brake strip. With the HED Ardennes Plus Black, you can enjoy the consistent stopping power of alloy rims without sullying the matte black-on-black finish of your race rig with the silver stripe of alloy shame. As alluded to above, the most striking feature of the Ardennes Plus Black wheels is the black finish of the brake tracks, which are the result of HED's Turbine Braking Technology. HED claims this design nets some pretty impressive numbers, including stopping distances in dry and wet conditions that are reduced by 25% and 70%, respectively, and brake power consistency that enjoys a claimed 5x increase over non-Black rims. While HED is jealously guarding the details of this process for obvious reasons, we do know that it's the result of a proprietary process of machining and anodizing, and we suspect that the gains are mostly attributable to the former while the latter is just a welcome aesthetic flourish. Other than those improvements to the brake track, the Ardennes Plus Black is essentially a rebranded version of HED's previous Ardennes Plus king, the FR. The tubeless-ready rim is still a lightweight alloy whose stiffness ensures that the end product can be made with less material — and therefore lower weight — than comparable alloy hoops. It's also got the low spoke count of the previous model, which keeps weight down while taking advantage of the wider rim's increased resistance to torsional and lateral flex. The Ardennes Plus Black wheels also see a return of HED's Sonic Silver model, only rebranded and — of course — re-colored. They run ABEC5 bearings on oversized axles, 12mm in front and 15mm in the rear. The flanges are spaced as widely as possible to create a stronger bracing angle, resulting in lateral stiffness that any rider approaching HED's suggested weight limit of 225 pounds will appreciate. The front hub has a carbon-fiber tube with aluminum end caps. The rear is aluminum with exaggerated flanges and a grease port, so you can power wash and re-lube the wheels as needed. Both skewers have titanium shafts, and the ratchet ring in the rear hub is also titanium. Finally, please note that HED suggests using brand new brake pads with these the Ardennes Plus Black rims. The same metal shavings that hide out in used pads and tend to destroy carbon wheels may also damage the Black rims' finish. C2 Alloy rims 24.5mm rim depth Turbine Braking Technology Tubeless-ready
DT Swiss HEC 1400 SPLINE 47 Rear
$1,473.90
With the HEC 1400 SPLINE 47, we offer the perfect endurance wheelset for e-road bikes, delivering all the advantages of the AERO+ concept mixed with e-bike-specific components to ensure a long-lasting and trouble-free ride. A valuable upgrade for any high-end e-road bike, these wheels promise premium performance and aero advantages, along with many envious glances from overtaken riders. - Shimano/SRAM 11-speed road cassette-compatible
DT Swiss HEC 1400 SPLINE 62 Rear
$1,473.90
The HEC 1400 SPLINE 62 is the ultimate e-road bike wheelset with a true racing character and outstanding aerodynamic performance. Specifically developed e-bike components, ensuring a long-lasting and trouble-free ride, this wheelset offers the speed needed when you want to fall-in with the young guns keeping the pace high on your group ride. And let's be honest, the visual appearance of the HEC 1400 SPLINE 62 turns every e-road bike into a head-turner. - Shimano/SRAM 11-speed road cassette-compatible
DT Swiss HGC 1400 SPLINE 42 700c Rear
$1,473.90
While our Hybrid Endurance wheels are made to deliver maximum speed on tarmac, our Hybrid Gravel wheels deliver maximum fun on gravel roads. The HGC 1400 SPLINE 42 is the answer for high-end e-gravel bikes that set the benchmark in a new cycling segment. With a select mix of high-end e-specific hubs, spokes, and rims, this wheelset has the pedigree to be the uncontested King of e-gravel. - Shimano/SRAM 11-speed road cassette-compatible
DT Swiss ERC 1400 Spline 47
$1,441.90
Our benchmark-setting Aero+ rim matched to a punchy mix of top end aerolite and laced to premium Ratchet System hubs makes for a wheel that delivers in all riding situations. Fitting 28mm tires on its wide rims will give you all the comfort and grip needed for extended rides on mixed surfaces. At the same time, in combination with 25mm rubber, the ERC 1400 SPLINE will aero optimize your race bike, ready for you to set your own, new benchmarks.
DT Swiss GRC 1400 SPLINE 42 650B Rear
$1,441.90
Introducing the Gravel racing king — GRC 1400 SPLINE 42, the most sophisticated gravel wheelset on the market. Taking a holistic approach to engineering, we rethought the characteristics of a modern benchmark-setting gravel wheelset. Aerodynamic efficiency for sustainable speed and endurance, ideal support of wide gravel tires for unprecedented comfort and traction off-road, as well as remarkable durability make this wheelset the perfect companion for your next gravel adventure. - Shimano/SRAM 11s road cassette-compatible
Page 1 of 13 Next page