Parts & Accessories
- Replacement straps for Sidi Shoes - 15mm width - Compatible with 2011 and newer shoes - Buckles sold separately
S-PHYRE Insulated Shoe Covers take advantage of our Shimano Fusion Concept System Engineering and Anatomic 3D design knowledge to construct a cold-weather cover that interfaces perfectly with S-PHYRE footwear. Flexible, one-piece, pull-on design delivers optimized waterproof protection and comfort in cold and wet training conditions. An added bonus of creating shoes and shoe covers as a system is that the Boa dials are readily accessible and adjustable without removing the covers, making mid-ride fine-tuning easy. Material 88% Rubber, 12% Polyamide Anatomic Construction 3D Anatomic patterned low cut openings for stress-free pedaling comfort. Wet Weather Ready Fully waterproof seam-sealed construction. Easy Cleanup Hydrophilic fabric for easy mud and debris clean up. Heat Retention METALLIC THERMAL TECH-Ti Neoprene retains heat and provides insulation from the cold and elements. Designed for Comfort Highly-stretchable neoprene and zipper-free construction for comfortable aerodynamic fit. On-the-Bike Adjustability Boa closure adjustment is accessible without removing shoe cover. System Engineered A shoe cover designed from the ground up to work with the shoe. System engineered for optimal interface with RC9 and XC9 cycling footwear.
Designed for the nastiest, frigid conditions, the Pearl Izumi P.R.O. AmFIB WxB Shoe Covers transform your road shoes, allowing them to thrive year round. Primaloft Gold insulation and P.R.O. Barrier WxB fabric with an Outdry membrane provides waterproof, breathable coverage to keep feet toasty. Kevlar bottoms and rubber reinforcements on the toes add durability to the high-wear areas. The best part: Pearl's patented two-stage hook-and-loop closure makes these covers easy to put on and take off, while ensuring a snug fit against both your shoe and ankle. Features: - P.R.O. Barrier WxB powered by Outdry provides optimal water protection by bonding the waterproof, breathable membrane directly to the interior of the shell fabric - 100g Primaloft Gold insulation provides optimal warmth without bulk - Updated two-stage hook and loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - Kevlar road bottom spreads open for easy on and off while providing superior durability - Recommended for road shoes with external cleats - Reflective elements for low-light visibility - Shell: 100% polyester; Insulation: 100% polyester; Bottom: 59% nylon 25% Kevlar aramid 16% polyurethane
There are some chilly days when you know that a pair of shoe covers will be overkill, but you'd rather keep your toes warm and worry about riding instead. That's where these toe covers fit in. They will keep your feet warm on cold and dry days. - Cut-outs for all current pedal systems - Reflective details at front - Fabric with versatile, medium thermal protection - GORE WINDSTOPPER Product: totally windproof, extremely breathable and water repellent - Lightweight material for easy storage - Reflective transfer print to mark right and left
Having a go-to wardrobe that can deal with the worst weather is key when you have to get out and ride in all seasons. Keeping your feet warm and dry will make your commute or foul weather ride easier and more comfortable. - Open soles framed by abrasion resistant material - Ideal to wear with cycling and leisure shoes - Lightweight material for easy storage - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Reflective details at front, back and side - Reflective transfer print to mark right and left - Back velcro width adjustment
These lightweight and low bulk overshoes are a great compromise when you need to keep your feet warm, but don't want to restrict pedaling movement. Completely windproof, you'll instantly feel more comfortable on every training ride in the wind. - Reflective logo on side - Fabric with versatile, medium thermal protection - GORE WINDSTOPPER Product: totally windproof, extremely breathable and water repellent - Elastic cuffs - Reflective piping on back - Elastic back for maximum comfort and fit
Ideal for the cold season: Extremely lightweight GORE WINDSTOPPER overshoes keep your feet wonderfully warm. They fit snugly on shoes for a close fit. A zipper on the back makes for easy off and on. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Elastic back for maximum comfort and fit - Reflective logo and piping - Zipper closure
The utilization of GORE WINDSTOPPER material on these overshoes provides a low bulk solution to keep your feet warm. The flexible and breathable WINDSTOPPER material will fit snuggly to your shoes to prevent flapping and maximize moisture management. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Elastic back for maximum comfort and fit - Thermo lining: Increases warmth; brushed and soft back for next-to-skin comfort - Reflective logo and piping - Fully taped seams for increased protection - Zipper closure
These especially lightweight and compact overshoes feature an abrasion-proof Kevlar sole that is resistant to even the most extreme wear. With Gore-Tex technology, these overshoes are waterproof and windproof, yet they still breathe, ensuring warm feet even in bad weather.
Lightweight overshoes with total PrimaLoft insulation and double coverage over the toes ensure warm feet even in the coldest conditions. Gore Windstopper fabrics keep out freezing wind. Easy on and off thanks to a full-length zip on the back.
- Compatible with Look Delta System - Engineering thermoplastic injection body - Weight of 24 grams per cleat - 9-degree arc
- Compatible with Look Delta System - Engineered and injected thermoplastic body - 24 grams per cleat - Fixed position
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair
The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out. - Weight: 44g/pair
Authentic Ritchey replacement cleats for WCS Micro Road Pedals. Note: only Ritchey replacement cleats work with the Micro pedal. - Beveled cleat compatible with Ritchey WCS Micro pedals - Compatible with SPD style pedals
For those cool days when rain forces you to cover your shoes, the H2O 2 knows no equal. This shoe cover offers extreme protection from torrential downpours. The bottom of the shoe is almost entirely covered while the top repels water and also blocks wind. DETAILS: - Neoprene cuff: Better fit that prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - Rear opening: Rear zipper with zipper protector for easy slip on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
• Replacement ratchet tongue for selected styles of shoes • 2 pieces • 93mm
Replacement studs for Louis Garneau MTB and cyclocross shoes. Contains four 8mm-tall studs and a stud remover tool.
• Replacement ratchet set for selected styles of Garneau's shoes • 2 pieces
- 2 anti-slip platforms and 6 screws (4 x 17 mm) - Fit on all combined SPD and road outsoles - Convenient for stability and walking and are easy to clip on
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. Good news! Your search for the perfect foul weather shoe cover is over! Introducing the Garneau Thermal H2O Shoe Covers (some minor "assembly" required). This seam-sealed, 3mm super stretch neoprene, fleece-lined shoe cover is 100% wind and waterproof, and will keep your toes warm in the nastiest of weather! Its outsole is made out of rubber for additional traction, and can be cut to fit whatever type of cleat you have using the integrated cutting guide. We round it out with a seam-sealed zipper that tucks into a zipper garage and hits of reflectivity that offer additional visibility in low light conditions. Technical Details - Under Sole: Durable pre-cut rubber sole for better water resistance - Opening: Sean-sealed zipper for all weather conditions - Shoe Cover Fabric: super stretch neoprene laminated with fleece
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. The Thermal Pro is Louis Garneau's warmest shoe cover that provides 360 degrees of customizable protection from the worst winter can bring. A seam-sealed 2 mm neoprene outer with a fleece-lined inner provides unparalleled warmth, a customizable under sole prevents anything from seeping up into your foot, and easy wide openings with waterproof zipper and covered zipper garage keep the fouls of winter weather at bay. - Under Sole: Durable pre-cut rubber sole for better water resistance - Side opening: Seam-sealed Hook and loop fastener with safety puller for easy slip on/off - Shoe Cover Visibility Features: HiViz 360 - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
Protect your feet from the elements with the Thermax II. This shoe cover provides high insulation from the cold and is very water resistant. The Thermax II offers maximum visibility thanks to reflective accents located at the front, rear and side. DETAILS: - Fabric: All seam-sealed 3 mm super stretch neoprene laminated with fleece - Under sole: Under opening with Velcro for easy adjustment and reinforced rubber for durability - Side opening: Side Velcro with safety puller for easy slip-on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
The in-between solution to protect your feet on those chilly days. FABRICS: -ISO LITE: Provides warmth in cool weather -ANTISLIP 3 MM NEOPRENE : Isolates from cold, provides warmth and durability DETAILS: -Cleat opening under sole -Flatlock seams: Enhanced comfort -Reflective puller
The Transfo 3D Insole is quite simply the lightest insole on the market. Offering a simple and easy way of customizing the arch support that your foot receives, this is an innovative means of improving overall comfort on the bike and reducing the chance of long-term injury. Simply remove and replace the inserts based on how much arch support your foot requires. The non-slip surface of the underside of the insole locks it in place against the footbed of the shoe, while the Ergo Air ventilation system preserves airflow. The insole can be adapted to all types of cycling shoes, for both men and women. - Unisex - Arch support: Low/Med/High adapted arch profile ensures maximum foot contact for optimal support - Ergo Air: Provides through-and-through ventilation - Removable arch: Patent-pending anchoring system allows for an easy and customized adjustment - Under insole: The non-slip surface maintains insole in place
If the sun is shining, why not go for a ride despite the cold? The Wind Dry 2 is an excellent wind-breaker that will protect your feet from the cold so you can extend your riding season safely thanks to reflective accents on all sides. DETAILS: - Fabric: WIND DRY fabric blocks cold while providing breathability - Neoprene cuff: Better fit and prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - HiViz360: Reflectors at rear, front, and sides for optimum visibility
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
For optimum power transfer to the bike, leg power needs to be effectively converted into propulsion. The IP3 insoles from Ergon support and stabilize the power transfer from the legs and feet straight to the pedals. Due to the patented stabilization delta, a natural foot position is achieved through three points resulting in an efficient and comfortable motion sequence while pedaling. Made in Germany and developed with insole specialist Solestar.
Page 1 of 2 Next page