For 2" hitches, this extension gives you more clearance for your bike rack or trailer away from the vehicle. The insert tube is threaded, by bolting in the extension, you get rid of 80% of the play and rattle vs extensions that use a pin. Included is the 8" extension, hitch bolt, and lock pod. Allows BackStage, MonoRail & SplitRail racks to fold flat on Wrangler and other cars with spare tires. Works well with all bike racks including Thule, Yakima, and Kuat. As with all hitch extensions, they lower weight ratings by 50%, confirm you are within specifications before use. - Electroplated plus powdercoat for best rust resistance - Welded steel construction - Includes lock, two keys & wrench for installation - Fits 2" Hitches only - Maximum Trailer Weight- Lower amount of 3500 lbs OR 50% maximum listed on your trailer hitch - Maximum Tongue Weight- Lower amount of 350 lbs or 50% of maximum listed on your hitch. (For use with bicycles, Tongue Weight is your guide, not Trailer Weight)
$429.99 - $449.99
RockyMounts employed components from their SplitRail to develop the MonoRail. The MonoRail carries two bikes with an option for a third bike (2-inch model only) for up to three-bike capacity. It holds everything from kids, road, mountain and fat bikes without missing a beat. - 39 lbs assembled weight - Simple 5 minute assembly - Fits bikes 20-inch to 29-inch wheels, road to fat bike tires 5-inch wide and 197mm rear spacing - 13-inch spacing between bikes and 3" side-to-side adjustment provides plenty of room between bikes - Handle located at end of rack for use, stowed and folded away positions - Max weight 60 lbs per bike, 120 lbs per rack - No bike frame contact, hook clamps front wheel - CRMO hitch tube is light weight and corrosion resistant - Included locks, bike to rack, rack to car with same key - Anti-wobble hitch pin keeps the rack solid and secure
The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.
We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.
When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes
Expand your vehicle’s carry capacity (and your circle of friends) up to four bikes with the NV 2.0 Add-Ons. It's conceived for road trips, family group rides and expeditions in the backcountry—we took the best platform rack on the market and increased it. Integrated Cable Locks - Seamlessly integrated locks—long enough to fit any frame—make sure your bike stays off Craigslist while you enjoy that post-ride beer stop. And when you’re ready to roll again, they stow right back into the rack. Adjustable Tire Cradles - Bikes not wanting to share space nicely? Easily dial in the fit with adjustable tire scoops. You get three positions to choose from, so handlebar and seat post clearance is never an issue. - Intuitive Front Tire Ratchet - Trail-Doc Compatible - Premium Protective Gloss or Matte Powdercoat
You know all the secret spots, the best trails, and the best places to get a post-ride burger. You're awesome! Everyone want's to ride with you, set up shuttles, and rip some trail. One problem though—you've only got room for 2 bikes. What kind of shuttle buddy would you be if you let something like that become a problem? Thankfully, Kuat makes the NV Add-On for your trusty 2-inch receiver NV rack. It bolts on to the end of your NV and makes your 2-bike hauler a 4-bike carrier. It even retains all the great features of the NV, like the Trail Doc repair stand, integrated cable lock, easy tilt lever, and hand tightening anti-wobble cam. Best part about it? It's easily removable, so you can always say you don't have room when you want to ride solo. - Compatible with 2" NV, the Add-On increases NV's capacity to carry up to FOUR bikes (40 lbs. each) - Total carrying capacity of up to 160 lbs. - Integrated cable lock for security - Compatible with TRAIL DOC repair-stand for quick fixes on-the-go - Front and rear tire ratchets make loading and unloading a breeze - Weighs only 30 lbs assembled (Add-On Only) - Accommodates up to a 48" wheelbase - Fits 20" - 29" wheels - Fits up to a 3" tire - Compatible with 2-inch NV only
When your solo ride turns into a weekend expedition with friends, the NV Base 2.0 Add-On lets you increase the NV Base 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium matte powder coat - Compatible with 2-inch NV Base 2.0 - Increases 2-inch NV 2.0 carrying capacity to 4 bicycles weighing up to 40 pounds each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Quick change from 2 to 4 bikes
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes
$279.99 - $479.00
The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price. - Flatlock cam for 2", ball cam for 1.25" - Includes semi-integrated bicycle cable lock - Tamper-resistant hitch security - More robust hitch design for enhanced stability in tow - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes - Automotive-grade 750 hour salt spray hardware - Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Sleek and strong, the BedRock HD’s low profile delivers a 300-lb. on-road capacity and Yakima's exclusive new Off-Road Rating for up to 180 lbs. all without the need to drill into the truck bed. Pair it with the HD Bar length that best fits the bed to carry bikes, skis, cargo boxes or the SkyRise Rooftop Tent all while preserving valuable cooler-carrying capacity underneath (HD Bar sold separately). This powerhouse truck rack provides strength and security, easily-accessible tie-down points, and T-slot attachment capability that makes adding gear easy. Product Details: - Easy to reach low profile height position makes it easy to rack out and reach gear - Comes with four towers - Requires Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately) - Simple, tool-free attachment makes installation, removal and crossbar spread adjustments a breeze - Best-in-class, maximum on-road rating of 300 lbs. - Maximum off-road rating of 180 lbs. - Built to last, with engineered aluminum construction and durable powder-coat finish - Integrated tie-down points on end-caps of HD Bar make securing any load quick and simple - T-slot attachments make adding gear mounts and accessories fast and easy - Designed and tested for all common truck beds - Integrated SKS (Same Key System) locks the rack system to the truck bed - Suggested mounts and accessories: Bike Mounts, Cargo Baskets, SkyRise Tent, Wear Strips, Eye Bolts, BigCatch Fishing Kayak Saddles Product Specs: - Weight: 8.01 lbs - Dimensions: L 5.50in x W 4.25in x H 7.00in - Some assembly required, 30 minute install
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty
The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry six pairs of powder skis—up to 136mm at the tip—or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The OverHang clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security, and the mirror black finish looks awesome on your roof. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries six pair of skis—up to 136 mm wide at the tip—or four snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - For easier access to skis and snowboards, the OverHang clamp-mounting position shifts the mount further out on your vehicle's roof rack - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 12.75 lbs. - Dimensions: L 40.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2020+ Toyota Highlander. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 30 7/8" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed Product Specs: - Weight: 1.38 lbs.
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Use Yakima's MegaWarrior Stretch Net to secure and control loads on the MegaWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key
Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front hubs Product Specs: - Weight: 0.44 lbs. - Dimensions: L 9.00 in x W 0.75 in x H 2.00 in - Limited Lifetime Warranty
Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.