Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

29-Inch Wheel (29ers)

$4,499.99 $6,499.99 31% Off
ARE YOU THIS RIDER? Do your friends ask if you intend to ride the chairlift when you invite them out for a 'few' park laps? Do your top routes frequently involve pushing up and down trails that aren't on any map? Do your favorite rides begin or end with headlamps, an ice chest, and great friends? Does your bike have to do everything well to get you there and back again? If you think you might be this rider, then Occam should be your bike. - Intended Use: Trail To Light Enduro LINKAGE UPDATE Occam uses a new two-part linkage design. Fewer pieces mean fewer interfaces, greater rigidity, and a lower chance of something working loose. Additionally, we have created a space in the axel and filled it with a handy 4 key multi-tool which is held securely in place with magnets. Always have the most-used tools close at hand for quick tweaks. INTERNAL CABLE ROUTING Occam has our latest, fully internal cable routing, using silicon plugs at the frame entry and exit points and clever conduits linking the front and rear triangle so your cables are fully protected. ASYMMETRICAL DESIGN Instead of using a less-efficient "shock tunnel", the Occam offsets the shock to the left side of the frame, allowing the right-side support to be more central and more efficiently deal with the suspension forces acting on the front triangle. This solution enables us to tune the stiffness of this high-stress area without adding unnecessary weight. THE ASYMMETRIC/OFFSET DESIGN OFFERS UNIQUE ADVANTAGES BEYOND STIFFNESS AND LOW WEIGHT. Avoiding an interrupted seat tube gives more space for dropper posts plus improves access to the shock controls. Additionally, the tidy design leaves room for a water bottle with easy left-side access.
$3,999.99
ARE YOU THIS RIDER? Do your friends ask if you intend to ride the chairlift when you invite them out for a 'few' park laps? Do your top routes frequently involve pushing up and down trails that aren't on any map? Do your favorite rides begin or end with headlamps, an ice chest, and great friends? Does your bike have to do everything well to get you there and back again? If you think you might be this rider, then Occam should be your bike. - Intended Use: Trail To Light Enduro LINKAGE UPDATE Occam uses a new two-part linkage design. Fewer pieces mean fewer interfaces, greater rigidity, and a lower chance of something working loose. Additionally, we have created a space in the axel and filled it with a handy 4 key multi-tool which is held securely in place with magnets. Always have the most-used tools close at hand for quick tweaks. INTERNAL CABLE ROUTING Occam has our latest, fully internal cable routing, using silicon plugs at the frame entry and exit points and clever conduits linking the front and rear triangle so your cables are fully protected. ASYMMETRICAL DESIGN Instead of using a less-efficient "shock tunnel", the Occam offsets the shock to the left side of the frame, allowing the right-side support to be more central and more efficiently deal with the suspension forces acting on the front triangle. This solution enables us to tune the stiffness of this high-stress area without adding unnecessary weight. THE ASYMMETRIC/OFFSET DESIGN OFFERS UNIQUE ADVANTAGES BEYOND STIFFNESS AND LOW WEIGHT. Avoiding an interrupted seat tube gives more space for dropper posts plus improves access to the shock controls. Additionally, the tidy design leaves room for a water bottle with easy left-side access.
$3,599.99
Take control. Don't accept compromises. Oiz isn't down-country or trail; this is a 120mm XC race machine that looks as good as it rides. Modern geometry and clever suspension, designed from the start around 120mm, bring extra fun to every ride without compromising weight or efficiency. Simply put, Oiz is the fastest XC bike to leave our factory in over 180 years. 120mm of Uncompromised Travel Historically choosing between 100mm and 120mm required a compromise; the control of 120mm or the weight and efficiency of 100mm. Oiz refuses to accept that compromise, designed from the start around longer travel but lighter and more efficient than ever. SIC System Our SIC system routes the cables along the best path through the headset, through internal guides and invisibly from the front to rear triangle via our Cable Pass. I-line Our patented I-line is simply the sleekest, most integrated shock lock-out on the market. You Can't Beat Simple Removing anything which is superfluous and only adding features which enhance the ride means that at 1740g Oiz is one of the lightest XC frames out there. Light weight is key for a fast XC bike and relentlessly pursuing the simplest solutions means Oiz doesn't need compromise anywhere else to achieve this.
$3,599.99
AIM FOR THE TOP Oiz is familiar with the hard work it takes to reach summits, leaderboards, and podium steps. We don't need to fabricate a pedigree for this phenomenon - two world championships prove Oiz is a thoroughbred. Oiz and serious cross-country are synonymous, its presence on the World Cup is undeniable. Is the lightest, stiffest and most efficient machine available whether you pin on a number or take it up to the highest peak on your afternoon ride. Oiz has what you need to get there - there is no better weapon to aim for the top. OMX - 1740g - The new OMX frame is lighter, a bit stiffer, and more nimble with 5mm shorter stays. If what you're after is an absolute XC Race experience, OMX will deliver. WORLD CUP GEOMETRY - Super-short rear end for explosive acceleration, maneuverability, and steep climb traction. FLAT MOUNT - The lowest profile brake mount provides the cleanest, stiffest and lightest caliper integration available. FIBERLINK - In the quest for stiffness and clean lines, we developed the long-fiber injected Fiberlink. The perfect blend of low weight and impressive rigidity, Fiberlink integrates seamlessly with the shapes of Oiz and the seat tube. INSIDE LINE - It's the quickest way around the competition - and the optimal route for control cables racing to your fingertips. The proprietary rear shock lockout is completely invisible, hiding from mud and staying out of your way as you grab a water bottle. Controls are accessible and easy to use, creating the smoothest and sexiest shock mounting on the market. It's a small detail, but when your bike is optimized, customized, and weaponized, obsession over details can't be trivialized. TWO BOTTLES - One of the simplest features of the new Oiz was one of the most complex to accomplish - the MD, LG, and XL frames are all equipped with two bottle mounts inside the front triangle. The additional room made available by the Inside Line cable routing puts extra water at your fingertips instead of in your pocket or on your back. SQUIDLOCK REMOTE LOCK - A three-position lockout lever that is compact, lightweight, and integrates with your dropper post lever to allow you to use just one clamp, for both assemblies.
$3,299.99
Take control. Don't accept compromises. Oiz isn't down-country or trail; this is a 120mm XC race machine that looks as good as it rides. Modern geometry and clever suspension, designed from the start around 120mm, bring extra fun to every ride without compromising weight or efficiency. Simply put, Oiz is the fastest XC bike to leave our factory in over 180 years. 120mm of Uncompromised Travel Historically choosing between 100mm and 120mm required a compromise; the control of 120mm or the weight and efficiency of 100mm. Oiz refuses to accept that compromise, designed from the start around longer travel but lighter and more efficient than ever. SIC System Our SIC system routes the cables along the best path through the headset, through internal guides and invisibly from the front to rear triangle via our Cable Pass. I-line Our patented I-line is simply the sleekest, most integrated shock lock-out on the market. You Can't Beat Simple Removing anything which is superfluous and only adding features which enhance the ride means that at 1740g Oiz is one of the lightest XC frames out there. Light weight is key for a fast XC bike and relentlessly pursuing the simplest solutions means Oiz doesn't need compromise anywhere else to achieve this.
$3,199.00 - $3,999.99 $3,999.99 Up to 20% Off
EVERY RIDER, EVERY TRAIL The Norco Fluid can dive into corners. And carve sweeping turns. It's as happy mixing it up in the backwoods, as it is rolling local trails. It can elevate beginner riders to intermediate. And carry intermediates to expert. It can take your weekend hobby and turn it into a lifestyle. While so many bikes are made for a specific something or somebody, what the world needs is a bike built for every rider and every trail. That's the Norco Fluid. RIDER BENEFITS THREAD THE NEEDLE - Intuitive precision handling to pick the perfect line. - Engineered using the same Norco technology and process as our top-tier Trail bikes to give you the ride of your life no matter what path you follow. POTENTIAL FULFILLED - Top-tier design and features over-deliver as skills evolve. - 6061 aluminum frame gives experienced Trail riders what they need to ride their best and helps evolving riders develop new skills and preferences without limits. CUSTOM TUNED SUSPENSION - Sophisticated suspension components for full-platform performance and tunability. - Precision-engineered 130mm rear suspension features custom-tuned dampers co-developed with the shock manufacturers provides fully customized suspension setup and performance for every rider. ROOM TO MOVE - Long-travel droppers and generous standover get you through the rough stuff. - Long-travel, size-specific 34.9mm dropper posts and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain and push your limits. PERFORMANCE FOR ALL - Refined design and expanded size range for accessible Trail performance. - Boutique-level fit & finish is available in 5 frame sizes, delivering superior Trail performance to riders between 5'1" and 6'7" with components selected to offer peak performance and durability. RIDE ALIGNED - Perfect fit, dialed handling and personalized setup in minutes. - The Ride Aligned Design System matches each Fluid FS to the human who rides it. - Rider-first geometry and suspension kinematics combine with custom fit and suspension tuning for personalized performance from day one.
$2,529.00 - $3,149.99 $3,149.99 Up to 20% Off
EVERY RIDER, EVERY TRAIL The Norco Fluid can dive into corners. And carve sweeping turns. It's as happy mixing it up in the backwoods, as it is rolling local trails. It can elevate beginner riders to intermediate. And carry intermediates to expert. It can take your weekend hobby and turn it into a lifestyle. While so many bikes are made for a specific something or somebody, what the world needs is a bike built for every rider and every trail. That's the Norco Fluid. RIDER BENEFITS THREAD THE NEEDLE - Intuitive precision handling to pick the perfect line. - Engineered using the same Norco technology and process as our top-tier Trail bikes to give you the ride of your life no matter what path you follow. POTENTIAL FULFILLED - Top-tier design and features over-deliver as skills evolve. - 6061 aluminum frame gives experienced Trail riders what they need to ride their best and helps evolving riders develop new skills and preferences without limits. CUSTOM TUNED SUSPENSION - Sophisticated suspension components for full-platform performance and tunability. - Precision-engineered 130mm rear suspension features custom-tuned dampers co-developed with the shock manufacturers provides fully customized suspension setup and performance for every rider. ROOM TO MOVE - Long-travel droppers and generous standover get you through the rough stuff. - Long-travel, size-specific 34.9mm dropper posts and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain and push your limits. PERFORMANCE FOR ALL - Refined design and expanded size range for accessible Trail performance. - Boutique-level fit & finish is available in 5 frame sizes, delivering superior Trail performance to riders between 5'1" and 6'7" with components selected to offer peak performance and durability. RIDE ALIGNED - Perfect fit, dialed handling and personalized setup in minutes. - The Ride Aligned Design System matches each Fluid FS to the human who rides it. - Rider-first geometry and suspension kinematics combine with custom fit and suspension tuning for personalized performance from day one.
$1,899.00 - $1,999.99 $1,999.99 Up to 5% Off
EVERY RIDER, EVERY TRAIL The Norco Fluid can dive into corners. And carve sweeping turns. It's as happy mixing it up in the backwoods, as it is rolling local trails. It can elevate beginner riders to intermediate. And carry intermediates to expert. It can take your weekend hobby and turn it into a lifestyle. While so many bikes are made for a specific something or somebody, what the world needs is a bike built for every rider and every trail. That's the Norco Fluid. RIDER BENEFITS THREAD THE NEEDLE - Intuitive precision handling to pick the perfect line. - Engineered using the same Norco technology and process as our top-tier Trail bikes to give you the ride of your life no matter what path you follow. POTENTIAL FULFILLED - Top-tier design and features over-deliver as skills evolve. - 6061 aluminum frame gives experienced Trail riders what they need to ride their best and helps evolving riders develop new skills and preferences without limits. CUSTOM TUNED SUSPENSION - Sophisticated suspension components for full-platform performance and tunability. - Precision-engineered 130mm rear suspension features custom-tuned dampers co-developed with the shock manufacturers provides fully customized suspension setup and performance for every rider. ROOM TO MOVE - Long-travel droppers and generous standover get you through the rough stuff. - Long-travel, size-specific 34.9mm dropper posts and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain and push your limits. PERFORMANCE FOR ALL - Refined design and expanded size range for accessible Trail performance. - Boutique-level fit & finish is available in 5 frame sizes, delivering superior Trail performance to riders between 5'1" and 6'7" with components selected to offer peak performance and durability. RIDE ALIGNED - Perfect fit, dialed handling and personalized setup in minutes. - The Ride Aligned Design System matches each Fluid FS to the human who rides it. - Rider-first geometry and suspension kinematics combine with custom fit and suspension tuning for personalized performance from day one.
$1,299.00 - $1,749.99 $1,399.99 - $1,749.99 Up to 26% Off
Created in the rugged British Columbia mountains that inspire every bike we make, the Fluid HT is built with nimble, confident handling that'll give you every opportunity to discover which type of trail riding you prefer, and allow you to ride your best once you get there. The progressive aluminum frame design creates a powerful pedaling position, distributes your weight ideally between both wheels, and allows the front suspension to soak up bumps and keep your tires connected to the trail. - 6061 DB alloy Fluid frame - Trail geo with 120mm suspension fork - 27.5" sizing options in XS/S/M - 29" in M/L/XL - Tire fitment up to 2.6" - Internal routing for shifter and brake cables - Shimano Deore 12spd Drivetrain w/10/51 Cassette - X-Fusion RC32 Air 120mm Fork - Maxxis Ardent 2.4" Tires RIDER BENEFITS: - PROGRESSIVE DESIGN: The Fluid HT uses Norco's holistic approach to fit and geometry to achieve its playful, capable singletrack performance. The unique combination of longer reach, slacker head tube angle and steep seat tube angle provides a more forward weight distribution within a longer wheelbase. This allows more powerful pedaling, increased climbing traction and added grip and control when descending so you can confidently navigate the trail. - LIGHTWEIGHT ALUMINUM FRAME: The premium X6 double-butted aluminum frameset features size scaled tubing to maintain the same stiffness and ride quality across all frame sizes. This allows every rider to enjoy the same responsive and playful trail riding experience. Thoughtful design details like internal cable routing and smooth welding technology allow for clean lines and a quiet, rattle-free ride. - NO-COMPROMISE COMPONENT SELECTION: Thoughtful component selection at all price points bring performance to Fluid HT riders of all levels. Featuring dropper posts, reliable 1x drivetrains, and tubeless compatible 2.6" tires for maximum traction and control, the Fluid HT is ready for the trails you know and the ones you have yet to explore. - 27.5" AND 29" WHEELS: Designed around 27.5" wheels for XS-M frame sizes and 29" wheels for M-XL, the Fluid HT gives medium-sized riders a choice of wheel size allowing them to further fine tune handling characteristics based on their size, riding style and preferences. Both are tuned to deliver almost identical ride handling and optimal performance on any trail you can find. Wheel size: - Sizes X-Small – Medium: 27.5-inch - Sizes Medium – X-Large: 29-inch
$3,499.00 $4,699.99 26% Off
The Optic 2 SRAM is an aggressive short-travel sled that rips on descents and can get back to the top without a gondola. The Optic C2 SRAM sharpens your view on high speed trails. The precision suspension kinematics and custom DH spec shock creates 125mm of rear travel, matched with a gravity-eating 140mm fork for the control you need to keep your mind on the trail ahead. Reason's It's Rad - Fast never felt this fun. - Designed to work so you can play. - Components selected with speed on the brain. - Matching each Optic to the human who rides it.
$3,999.00 $4,799.99 17% Off
The Optic C2 Shimano is an aggressive short-travel sled that rips on descents and can get back to the top without a gondola. The Optic C2 Shimano sharpens your view on high speed trails. The precision suspension kinematics and custom DH spec shock creates 125mm of rear travel, matched with a gravity-eating 140mm fork for the control you need to keep your mind on the trail ahead. Reasons It's Rad: - Fast never felt this fun. - Designed to work so you can play. - Components selected with speed on the brain. - Matching each Optic to the human who rides it.
$4,699.00 - $5,699.99 $5,699.99 Up to 18% Off
We re-examined everything we know about XC performance and geometry, and by employing Ride Aligned technology, created the Revolver FS 100; the pinnacle of modern XC performance. The Revolver FS 120 benefits from the same stiff, lightweight chassis, but is specially-designed with a longer stroke rear shock and 120mm XC fork – creating a geometry specifically designed for larger than life rides where you don't have the time to pick the smoothest line – because there's a finish line to cross – in reality or your imagination. - Full Carbon 100mm Frame - 12x148mm - XC Race Geometry with Gravity Tune - Custom Tuned RockShox Rear Suspension - Ride Aligned - New RockShox SID SL Ultimate w/TwistLoc Remote - New RockShox SIDLuxe Select+ RLR 100mm w/Remote - SRAM GX Eagle 10-52T Cassette - New DT Swiss XR 1700 Aluminum wheelset - Tubeless ready w/Stan's valves and sealant RIDER BENEFITS: - POWER TO THE WIN: The Revolver FS's Ride Aligned XC design features a low, forward riding position for powerful, efficient pedaling, maximum traction, and a front end that stays on the ground when the going gets steep, so you're in control of where you go, and how fast you get there. - REDUCED FATIGUE: Shifting the rider's center of gravity for optimum weight distribution within the Revolver FS 100's wheelbase, riders are able to navigate every aspect of a race course from an optimal position. The fine-tuned Ride Aligned XC design provides increased grip and support when the rider is seated and powering through undulating terrain, which greatly-reduces fatigue by minimizing the need for weight shifts throughout the race. - STIFFER, FASTER FRAME CONSTRUCTION: The Revolver FS has been designed with a fine-tuned carbon frame to optimize pedaling efficiency. We engineered the downtube, bottom bracket and chainstay junctions to provide a 40% increase in axial rigidity, ensuring every available Watt you throw down is translated into forward motion. - OPTIMIZED SUSPENSION DESIGN: The Revolver FS is designed to excel on a wide variety of terrain. The Ride Aligned suspension kinematics maintain incredible traction both climbing and descending and provides an efficient pedaling platform without having to reach for a lockout, while tracking precisely through rough descents. By employing the Ride Aligned Bike Setup App, your suspension sets up quickly and precisely. - UNCOMPROMISED DESCENTS: In addition to the pedaling prowess of the new Revolver FS, we wanted to be sure it would charge descents – not just survive them. So, we designed the FS 100 with a 68.5 degree head angle and a 60mm stem. The 120 is a degree slacker which, when combined with the Revolver chassis' frame stiffness, 120mm dropper post and 2.35" tires, provides a level of precision and confidence on descents that will leave competitors in your wake.
$4,149.00 - $5,499.99 $5,499.99 Up to 25% Off
The Sight C2 boosts your All-Mountain confidence with incredible descending capability, adept, sure-footed climbing, and efficient pedaling. To make the Sight Carbon, we had to re-think how you connect with the trail. With maximum front and rear wheel grip on climbs and descents, Sight C2 maintains momentum and cadence in technical situations and allows the suspension to move freely without absorbing drivetrain energy. Reasons It's Rad: - Precise tune and fit perfects every ride. - Max standover with long travel dropper posts. - Sweating the little stuff makes the ride better. - Four piston brakes with 200/180mm rotors. - Features the Ride Aligned Design System. Wheel size: Sizes Small – X-Large: 27.5-inch or 29-inch
$5,549.00 $6,799.99 18% Off
The Trail Bikes that Love to Play The Juliana Furtado has always been more capable than many expected. But now with a high-traction 29-inch wheel up front, a maneuverable 27.5-incher out back, and even more refined suspension, their touch is even more deft on the trails. Featuring a 140mm fork and 130mm of VPP rear suspension travel, Furtado was made for sporty performance.
$2,000.00 $2,249.99 11% Off
MODERN MOUNTAIN BIKE TRAILS ARE FUN, FLOWY AND CHALLENGING. THIS FULL-SUSPENSION 29ER GETS YOU IN SYNC WITH THE TERRAIN, SO YOU CAN RIDE WITH MORE CONFIDENCE AND HAVE MORE FUN. KEY PERFORMANCE FACTORS Attainable trail performance Handcrafted with lightweight, stiff and durable ALUXX aluminum, it's the perfect entry to full-suspension performance. Smooth suspension FlexPoint Suspension technology helps you tackle challenging terrain and improve your trail riding capabilities. 29er confidence and control Larger diameter wheels roll over rugged terrain with balance and stability, giving you the momentum to tackle technical climbs and the confidence to fly on singletrack descents.
$784.00 - $980.00 $880.00 - $980.00 Up to 20% Off
Get a feel for the trail with this all-new aluminum hardtail made for aspiring singletrack riders. It features stable, fast-rolling 29-inch or more-playful 27.5-inch wheels so you can push the pace on climbs and let loose on the descents. Built on a new lightweight ALUXX aluminum frame that features classic hardtail design plus the balanced riding characteristics of either larger diameter 29-inch or 27.5-inch wheels, Talon is a great choice for XC or light trail terrain. The frame geometry is specifically designed to adapt to its respective wheel size and either an 80mm or 100mm suspension fork (depending on frame size). It's a confident ride that's perfect for ambitious riders who want to take their off-road skills to the next level. Proven alloy performance ALUXX aluminum frameset is hand-built in-house by the world leader in aluminum engineering. Balance and stability Frame geometry is designed to optimize the balance and roll-over capabilities of 29-inch wheels or the liveliness of 27.5-inch wheels (depending on frame size). XC control Suspension fork offers either 80mm or 100mm of smooth travel for added XC control. Wheel size: Sizes X-Small – Medium: 27.5-inch Sizes Small – X-Large: 29-inch
$4,799.99 - $8,999.99
When Team Jumbo-Visma decided it was time to race XCO, they came to us for the answer. The ZHT-5 marks a new era for Cervélo and the team, as we go racing together. Our engineering expertise has already been proven in cyclocross (R5-CX) and gravel racing (Áspero), and now we’ve upped the ante and designed a mountain bike worthy of the Cervélo name. ZHT-5 is a Cervélo through and through: fast, efficient, and fun to ride. The 69-degree head tube angle, modern reach, and short chainstays combine to make a bike that’s stable at speed and nimble enough for pack racing. There’s room to maneuver in the cockpit, whether you’re darting inside on an uphill hairpin, or hanging off the back to make time on the descent.
$5,549.99
Flow Seeker A trail mountain bike that is primed for grinding climbs, mashing flats, and ripping descents. One for all, and all for fun! Highlights - Full Carbon frame - 130mm travel / SRAM GX Eagle 12-speed drivetrain - Rockshox Pike Select+ 140mm fork / Deluxe Select+ shock - SRAM G2 R hydraulic disc brakes / DownLow dropper post Built for you The Habit geometry is uniquely size specific. With our Proportional Response Design, everything from the suspension layout to, the geometry —even the length of the chain stays — is completely customized by size. Performance built, just for you. Blissfully Balanced With a head tube angle of 65.5° and the seat tube set at 77.5°, you are sitting in the optimal position for powering uphill, shredding downhill, and stopping to smell the roses. Easy to love Keeping things simple and easy for the rider with threaded BBs, universal derailleur hanger, standard shock mount, internal cable routing, and an updated 55mm chain line standard for tire clearance. All designed to make it as easy as possible to live with and to love.
$4,716.99 - $5,549.99 $5,549.99 Up to 15% Off
Thrill Seeker The Habit LT is a progressive trail mountain bike that is down for the ups but lives to get down. Precisely tuned for controlled chaos. Highlights - Full Carbon frame / SRAM GX Eagle 12-speed drivetrain - Rockshox Pike Lyrik Select+ 150mm fork / Super Deluxe Select+ shock - SRAM Code R 4-piston hydraulic discs / DownLow dropper post Built for you The Habit geometry is uniquely size specific. With our Proportional Response Design, everything from the suspension layout to, the geometry —even the length of the chain stays — is completely customized by size. Performance built, just for you. Calibrated for Control Boasting a slacker head tube angle of 64.7° and laid-back seat tube at 77°, the Habit LT puts you in an optimal position to shred the descents and control your steed with unshakable confidence. Easy to love Keeping things simple and easy for the rider with threaded BBs, universal derailleur hanger, standard shock mount, internal cable routing, and an updated 55mm chain line standard for tire clearance. All designed to make it as easy as possible to live with and to love.
$2,299.99
The Purest Form of Racing. A whole new breed of XC Hardtail, purpose built to hurt 'em on the ups, drop 'em on the downs and propel you straight to the top step. Where it thrives Between the tape What it's built for Speed, Efficiency, and Endurance Highlights - Progressive, superlight carbon frame / RockShox SID SL 100mm fork - Shimano XT/Deore 12-speed group / Shimano M500 disc brakes - WTB STX i23 tubeless ready rims / Schwalbe Racing Ray-Racing Ralph EVO tires Confidence on edge No hesitant, fistful-of-brakes descending here. The ultra slack, 66.5° front end gives you the stability and control you need to really open it up on the downhills. Brake later. Corner harder. Pass on the descents. Stay centered Scalpel HT's Proportional Response size-specific chainstays and steep seat angle keep you balanced between the wheels for better traction and power on the ups, and more confident control on the downs. Drop the chatter Sculpted flex zones in the chainstays partner with dropped seatstays to eat up the chatter from rowdy terrain, boosting control, smoothing the ride, minimizing fatigue. Go harder. Go faster. Go farther.
$580.00 $759.99 24% Off
Level Up. A mountain bike built to raise your game and ignite a passion for the trail. Designed for the mountains and ready for anything. Highlights - Light and durable SmartForm C3 Alloy frame - SR Suntour XCT suspension fork, 100mm travel - Shimano 8-speed drivetrain w/double chainring crank / Shimano hydraulic disc brakes Where it thrives - Low-impact trails, gravel roads, leisurely ride What it's built for - Handling, durability Wheel size: - Sizes X-Small – Small: 27.5-inch - Sizes Medium – Large: 29-inch
$4,999.00
Blackthorn C SLX stands out in the carbon all-mountain bike field for its capability and value. The progressive geometry feels planted on descents and steep climbs. A 160 mm Fox Float X Performance fork and 140 mm RockShox Lyrik Select+ RC shock with Split Pivot suspension design grants you the poise to plow through rock gardens, send drops, and hit doubles with confidence. Blackthorn brings you the benefits of pack-free riding, thanks to the integrated down tube strap, top tube mounts, and a bottle mount. Shimano's SLX 1 x 12 drivetrain and four-piston brakes are components you can rely on. We designed Blackthorn C SLX from the dirt up to lead the all-mountain category. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.
$6,799.00
For an all-mountain bike with an adventurous side, Blackthorn C XT is the ticket. We designed the stiff carbon fiber frame around progressive geometry that feels planted on descents and climbs. We paired Blackthorn XT's 160 mm Fox Float 36 Performance Elite GRIP2 fork with a 140 mm Fox Float X Performance Elite shock that runs on our Split Pivot suspension platform for excellent small-bump compliance and support. A padded tube strap spot, top tube mount, and bottle mount allow for pack-free riding or extending your range. The Shimano XT 1 x 12 drivetrain and four-piston brakes keep you in control through testing terrain. Blackthorn C XT is a brilliant all-mountain bike equipped for a wide variety of singletrack adventures. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.
$2,999.99 - $3,499.99 $3,499.99 Up to 14% Off
Salsa Blackthorn Deore brings together performance and adventure. The aluminum frame is stiff enough to keep you on your line and durable enough to toss in a truck bed for shuttling. Our progressive geometry and Split Pivot suspension design offer a well-balanced platform for pedaling, descending, and taking on technical features. A 140 mm RockShox Super Deluxe Select shock and 160 mm RockShox 35 Gold RL fork ensure plenty of travel for gnarly drops, gaps, and other features. On-bike cargo features like a down tube strap, top tube mounts, and a bottle mount let you keep the weight of your ride gear down low on the frame so you're free to move your body without the burden of a pack. With Shimano's robust Deore 1 x 12 drivetrain backing you up, you'll find very few limits out there. Blackthorn Deore is the 29er all-mountain bike for big rides on diverse terrain. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.
$4,099.00
Blackthorn SLX is our 29er all-mountain bike that's perfect when you're not sure what trail has in store, but you know it's going to be steep, gnarly, loose, or all of the above. Progressive geometry comes to life in a 6061-T6 aluminum frame that's built to last. The 140mm rear shock and 160mm fork make for a smooth, balanced, controlled ride when the trail is anything but. Our tried-and-true Split Pivot suspension system delivers superb small-bump compliance, remarkable climbing ability, and limitless traction, even during braking. Shimano's SLX drivetrain and four-piston brakes are exactly the copilots you want when navigating hair-raising rock gardens, high-speed descents, and stiff climbs. Blackthorn SLX is the tool of choice for all-mountain adventures.
$2,999.99 - $4,399.99 $4,399.99 Up to 32% Off
Blackthorn SLX is all-mountain with a side of adventure. The stiff and durable aluminum frame uses our progressive trail geometry for a ride feel that's equal parts downhill ripper and stable climber. The Split Pivot suspension design builds on those qualities with supple-to-supportive travel linked to a 140 mm RockShox Super Deluxe Select+ shock. Paired with a 160 mm RockShox Yari RC fork, Blackthorn has the chops for those rugged lines you've been eyeing. On-bike cargo features like the integrated down tube strap, top tube mounts, and a bottle mount let you keep the ride essentials on your bike rather than your back. Shimano's SLX componentry means a smooth-shifting 1 x 12 wide-range drivetrain, while the four-piston brakes offer all the stopping power you'll need. Blackthorn is a clever and capable rig that brings a lot to the all-mountain table. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Purpose-Tuned Suspension The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. Progressive Geometry Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS Carbon Main Triangle with Carbon Seatstays and Aluminum Chainstays EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. Top Tube Accessory Mounts Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. Down Tube Three-Pack Mounts Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. Integrated Repair Kit Location Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) Accommodates a 26 oz Bottle All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. Internal Sleeved Cable Routing Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. Molded Frame Protection Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. Chain Guide-Compatible Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). Stealth Dropper Post Routing Compatible with 30.9mm dropper posts for true trail bike performance. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
$4,999.00
Cassidy C SLX gives you confidence in your lines. The carbon frame tracks straight through rock gardens and over obstacles, supported by RockShox's Super Deluxe Select+ shock and ZEB Select+ RC fork—good for 165 mm rear and 180 mm front travel. The geometry is long, low, and slack enough to tame the steepest descents, but still lets you earn your turns on the climb back up. Our Split Pivot suspension design is compliant and efficient, promising predictable braking and excellent traction. On-bike cargo features include a padded tube strap spot, top tube mount, and full-size bottle clearance for longer rides and less weight in your pack (if you need one at all). The Shimano SLX 1 x 12 groupset is renowned for its reliable performance. Ready to rip? KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
$6,899.00
Cassidy C XT is a well-balanced carbon enduro bike. The stiff frame helps you hold your line through treacherous terrain, while Fox's Float X2 Performance shock and Float 38 Performance Elite GRIP2 soften the trail with 165 mm rear and 180 mm front travel. Progressive trail geometry and our Split Pivot suspension design keep your tires planted both down and up the mountain. On-bike cargo features such as a padded tube strap spot, top tube mount, and full-size bottle clearance support extra laps or longer days out, making Cassidy ideal for enduro adventures. Shimano's XT 1 x 12 components bring smooth shifting, wide range, and four-piston brakes to take it all to the next level. Time to start adding trails to your "must-ride" list. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
$4,099.00
Cassidy is the natural evolution of our Split Pivot lineup. The aluminum frame is engineered for hard-charging on huge terrain, and its progressive geometry with 165mm of rear travel and a 180mm RockShox ZEB fork takes the edge off of burly rock gardens, daunting drops, and steep and sketchy trails. The Split Pivot suspension system adds pedaling efficiency and offers smooth, consistent braking throughout the travel for maximum traction. Shimano's SLX components round out the package for precise shifting, while four-piston brakes bail you out of any situation. Cassidy SLX is made for pulling off smooth moves when the terrain is anything but.
$4,699.00
Cassidy SLX is built for more than just getting downhill the fastest. Sure, the 6061-T6 aluminum frame is up for all the trail punishment you can put it through. And the RockShox Super Deluxe Select+ shock and ZEB R fork have your back with 165 mm rear and 180 mm of suspension travel on tap. Cassidy's geometry and our Split Pivot suspension design ensure your tires stick to the trail, whether you're hurtling downhill or climbing back up for another lap. Unlike other enduro bikes, Cassidy features on-bike storage, such as a tube strap spot, a top tube mount, and full-size bottle mount. This lets you extend your ride time or just get the sweaty pack off your back. With a Shimano SLX 1 x 12 drivetrain and four-piston brakes, you're equipped for any enduro course or trail day. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.